Declaration Of Conformity - HP 11757B Installation And Calibration Manual

Declaration of Conformity

Manufacturer's Name:
Manufacturer's Address:
Declares that the product
:
Product Name
Model Number:
Product Options:
Conforms with the protection requirements of European Council Directive 89/336/EEC on the approximation
of the laws of the member states relating to electromagnetic compatibility, against EMC test specifications
EN 55011:1991 (Group 1, Class A) and EN 50082-1:1992 .
As Detailed in:
Assessed by:
Technical Report Number:6893/2201/CBR, dated 23 September 1997
Supplementary Information:
The product conforms to the following safety standards:
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC, and carries the CE
marking accordingly.
South Queensferry, Scotland
Location
Europe Contact::
Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department 2Q / Standards
Europe Herrenberger Strasse 130, D7030 Boblinger (Fax: +49-7031-143143)
Declaration of Conformity
according to ISO/IEC Guide 22 and EN45014
Hewlett-Packard Ltd.
Queensferry Microwave Division
South Queensferry
West Lothian, EH30 9TG
Scotland, United Kingdom
Multipath Fading Simulator
HP 11757B
This declaration covers all options of the above product as detailed in
TCF A-5951-9852-02
Electromagnetic Compatibility (EMC)
Technical Construction File (TCF) No. A-5951-9852-02
DTI Appointed Competent Body
EMC Test Centre,
GEC-Marconi Avionics Ltd.,
Maxwell Building,
Donibristle Industrial Park,
KY11 5LB
Scotland, United Kingdom
EN 61010-1(1993) / IEC 1010-1(1990) +A1(1992) +A2(1995)
CSA-C22.2 No. 1010.1-93
EN 60825-1(1994) / IEC 825-1(1993)
01 October 1998
Date
Declaration of Conformity
R.M. Evans / Quality Manager
iii