10
Customizing the Instrument
C A U T I O N
Installing External Instrument(s)
Installing External Instrument(s) - Concepts
538
If you connect P2 to the Data Out of the Pattern Generator, P1 provides the output.
The module has golden 2.4 mm connectors. Be sure to use the specific cables or
adapters for the connections. Improper connection can damage the module.
This section describes the procedure to install the external instruments with the
Serial BERT.
The following external instruments can be connected to Serial BERT:
•
N4916A/B De-Emphasis Signal Converter
To install N4916A/B De-Emphasis Signal Converter with Serial BERT, see
"Installing the N4916A/B - Procedure" on page 539
•
N4876A 28Gb/s Multiplexer
To install N4876A 28Gb/s Multiplexer with Serial BERT, see
N4876A - Procedure" on page 544
•
M8061A 28 Gb/s Multiplexer with De-emphasis
To install M8061A with J-BERT N4903B, see
Procedure" on page 549
Agilent J-BERT N4903B High-Performance Serial BERT
"Installing the
"Installing the M8061A -