Agilent Technologies J-BERT N4903B User Manual page 43

Agilent J-BERT N4903B High-Performance Serial BERT
Now since the physical connections are OK, you can enable the external
instruments through the Serial BERT's Config window.
1 Click Config menu item from the External Instrument(s) submenu. The
Config window shows the list of externally connected instruments (Ensure that
the external instruments are properly connected and installed). For more
information on Config window, refer to the section
51. Here are few examples:
Example - 1
The following image shows the Config window when the N4916B de-emphasis
signal converter is connected to the J-BERT N4903B.
Example - 2
The following image shows the Config window when the N4876A 28Gb/s
Multiplexer is connected to the J-BERT N4903B.
Setting up External Instrument(s)
"Config Window" on page
2
43