Omron M6 Comfort Instruction Manual page 16

3. Using the Device
3.
Remove the arm cuff.
4.
Press the START/STOP button to turn the monitor off.
The monitor automatically stores the measurement result in its memory.
It will automatically turn off after 2 minutes.
Note:
Wait 2-3 minutes before taking another measurement. Waiting between measurements allows the
arteries to return to the condition prior to taking a measurement.
Using the Guest Mode
The monitor stores measurement values for 2 users in the memory. The guest mode
can be used to take a single measurement for another user. No measurement values
are stored in the memory when the guest mode is selected.
1.
Press and hold the START/STOP
button for more than 3 seconds.
The USER ID symbol and the Date/Time display will disappear.
2.
Release the START/STOP button when the Date/Time
display turns off.
The arm cuff will start to inflate automatically.
Always consult your physician. Self-diagnosis of measurement results and self-treatment are dangerous.
12