Nice Moon MOTB Instructions And Warnings For Installation And Use page 9

04. Press the key to confirm
05. Enter the last number of the combinations to be deactivated
06. Press the key to confirm
07. Enter the same last number again
08. Press the key to confirm
Note – The keyboard emits 3 acoustic tones at the end of the procedure pro-
viding that it has been carried out correctly.
Activation procedure: (9)
01. Enter the current programming password
02. Press the key to confirm the password
03. Enter 9 to select the type of operation
04. Press the key to confirm
05. Introduce the last number of the combinations to be activated again
06. Press the key to confirm
07. Enter the same last number again
08. Press the key to confirm
Note – The keyboard emits 3 acoustic tones at the end of the procedure pro-
viding that it has been carried out correctly.
4.3.6 - Programming the number of uses of a combination
A counter is associated to every combination, which reduces every time that the
combination is used. It is deactivated when the combination reaches zero. The
number of factory-set uses is unlimited.
This procedure can be used to program the number of uses of one or more
combinations. The maximum value that can be associated is 999, higher values
mean unlimited operations.
Procedure: (10)
01. Enter the current programming password
02. Press the key to confirm the password
03. Enter 10 to select the type of operation
04. Press the key to confirm
05. Introduce the combination to be programmed
06. Press the key to confirm
07. Enter the same combination again
08. Press the key to confirm
09. Enter the number of uses to be assigned
10. Press the key to confirm
Note – The keyboard emits 3 acoustic tones at the end of the procedure pro-
viding that it has been carried out correctly.
4.3.7 - Procedure for deleting the entire memory if programmed in
PROFESSIONAL mode and if the password is known
This function can be used to delete all data contained in the keyboard BM
memory.
Procedure: (0)
01. Enter the current programming password
02. Press the key to confirm the password
03. Enter 0 to select the type of operation
04. Press the key to confirm
05. Introduce 0 for the first confirmation
06. Press the key to confirm
07. Introduce 0 for the second confirmation
08. Press the key to confirm
At the end of the procedure, if it has been carried out correctly, the keyboard
emits 3 acoustic tones (beeps) and 5 confirmation flashes.
At this point keyboard learning must take place by the control unit; it will then
be possible to program the keyboard in "PROFESSIONAL" modes.
In the "PROFESSIONAL" mode it is also possible to:
– Change the type of command associated to a combination (see chapter 6.1)
– Block and release the automation (see chapter 4.1.1)
– Delete the data in the BM memory (see chapter 6.2).
English – 7