Pre-Programmed Modes - Plantronics Habitat PWF63-C Manual

For non-static modes, the speed of the function can be adjusted using the S+/- buttons. Each
mode has its own speed memory; so when you come back to the mode it will remember the
speed it was left at the last time. Press the color wheel at any time to return lights to a static color
of your choice.

Pre-Programmed Modes

Please note: Dynamic modes (2-20) can become out of sync when multiple receivers are
controlled by the same remote controller. This is due to the inherent characteristics of each
receiver.
Mode
Number
1
2
3
4 RGB three colors gradual change
5 Seven colors jump to change
6 Three colors jump to change
7 Red/green jumps to change
8 Red/blue jumps to change
9 Blue/green jumps to change
10 White color blinks long pulse
Copyright EnvironmentalLights.com
Mode Description
Static white
White fade pulse
All color gradual fade
Mode
Number
11
12
13
14
15
16
17
18
19 Yellow color blinks short pulse
Combination mode – cycles through modes 1-19
20
5 All Rights Reserved 10/10/14
Mode Description
White color blinks short pulse
Red color blinks long pulse
Red color blinks short pulse
Green color blinks long pulse
Green color blinks short pulse
Blue color blinks long pulse
Blue color blinks short pulse
Yellow color blinks long pulse