Sparkfun Electronics LilyPad ProtoSnap Plus Hook-Up Manual page 8

1/22/2018
Note: The LilyPad ProtoSnap Plus and the LilyPad USB Plus requires Arduino version 1.8 or higher. If this is
your first time using Arduino, you can install it by following our
please make sure to install (or update to) the latest version of Arduino and verify that you are connected to the
internet to download the LilyPad USB Plus software add-ons.
Now that you've explored the board's features, it's time to upload some code! When you first install Arduino, it knows
how to program a number of "standard" Arduino-compatible boards. Since the LilyPad USB Plus is a newer LilyPad
microcontroller, you will need to manually add it to this list by following the steps below. You'll only have to do this
once to add the board to Arduino.
Note for Linux Users: If you are installing the LilyPad ProtoSnap Plus in Linux, this document has some
specific
notes:https://github.com/sparkfun/LilyPad_ProtoSnap_Plus/blob/master/Documentation/LinuxInstallation.md.
1. Add SparkFun Boards to Arduino's Preferences
Start the Arduino IDE software (version 1.8 or higher) and open the Preferences window by
choosing File > Preferences from the menu.
Now copy the below text and paste it into the "Additional Boards Manager URLs" text box:
https://raw.githubusercontent.com/sparkfun/Arduino_Boards/master/IDE_Board_Manager/pac
kage_sparkfun_index.json
https://learn.sparkfun.com/tutorials/lilypad-protosnap-plus-hookup-guide?_ga=2.234157401.659504291.1516640116-204410570.1509632255
LilyPad ProtoSnap Plus Hookup Guide - learn.sparkfun.com
Installing the Arduino IDE tutorial. Otherwise,
COPY CODE
8/23