Sparkfun Electronics LilyPad ProtoSnap Plus Hook-Up Manual page 12

1/22/2018
3. Select "LilyPad USB Plus" from Arduino's "Port" menu
Let's go over the three steps in detail:
1. Connect the LilyPad ProtoSnap Plus to Your Computer
Place the LilyPad ProtoSnap Plus on a clean, non-metal work surface. Connect the LilyPad ProtoSnap Plus to a USB
port on your computer using a micro-B USB cable. The cable can only be inserted one way, and should snap in
securely.
Tip: Both the micro-B USB cable and the connector on the LilyPad have a subtle "D" shape to them. Match this
shape to plug it in properly.
https://learn.sparkfun.com/tutorials/lilypad-protosnap-plus-hookup-guide?_ga=2.234157401.659504291.1516640116-204410570.1509632255
LilyPad ProtoSnap Plus Hookup Guide - learn.sparkfun.com
12/23