How To Clean; How To Clean The Exterior; How To Clean The Dust Sensor - LG AM30GUWF1 Owner's Manual

HOW TO CLEAN

20
HOW TO CLEAN

How to clean the exterior

Soak soft cloth in warm water, squeeze it well, and wipe the humidification air cleaner.
!
CAUTION
• Do not wipe the main unit control part and display part with alkali detergent.
• Do not use sulfuric acid, hydrochloric acid, or organic solvent (thinner, lamp oil, etc.) to
wipe the surface of the humidification air cleaner, and do not attach stickers, etc. It may
damage the surface.

How to clean the dust sensor

Dust sensor is a device to detect the degree of the contamination of the fine dust and big dust,
and lens part shall be periodically cleaned to maintain the performance.
1. If it was in operation, press
power, pull out the cord, and then open the front panel.
• When you open the front panel, the water in the tray
may spill, so do not open it hard.
2. Wipe the dust sensor lens with cotton swab.
• After the cleaning, close the dust sensor part cover in
the reverse order.
!
NOTE
• Clean the dust sensor lens about once per 2 months. But, the cleaning cycle is different
according to the usage environment and usage time, so in an environment with a lot of
dust, frequently clean it.
button to turn off the
Front
panel
Dust sensor
lens