Table of Contents
Advertisement
HOW TO USE
12
HOW TO USE
Air cleaning operation
It purifies the indoor with clean and fresh air.
1. Press the
button to start the air cleaner operation.
2. Set to the cleaning operation mode with
3. Select the desired wind amount with
• Whenever you press the
High → Auto.
• At the initial operation, it is set to the automatic operation. (In the automatic operation mode,
the wind amount is automatically controlled according to the indoor air contamination degree)
• After starting the operation, during the sensor stabilization period (30 sec.), the display part
prepares the cleanliness display.
Overall cleanliness color display
Dust particle size
After 30 seconds, the overall cleanliness and the dust density is displayed. But, odor sensor is
stabilized 2 min. after starting the operation, so before that time, it displays the cleanliness with the
PM10/PM2.5/PM1.0 contamination level.
!
CAUTION
If the front panel is not properly closed or open, 'OPEN' is displayed on the display part, and
it does not operate.
mode button.
Speed button.
Speed button, it repeats in the order of Auto → Low → Mid →
...
Odor/dust display part
Dust density display
Advertisement
Table of Contents
