Connection Layout; Connection Layout Of The F2 Housing - Pepperl+Fuchs F-JB Series Manual

F2-JB-#.I, F*-JB-#.*

Connection Layout

9 Connection Layout
9.1

Connection Layout of the F2 Housing

9
8
Figure 9.1
1 Connections for spurs
2 Connections for trunk
3 Slide switch terminator (only for non-explosion protected versions)
4 Grounding screw
5 Cable gland for trunk (output)
6 Cable gland for trunk (input)
7 Cable glands for spurs
8 Fastening option for connecting cables with cable fastener
9 Wall-mounting screw (6 mm)
Terminal
1+, 2+, 3+, 4+, 5+, 6+, 7+, 8+
1-, 2-, 3-, 4-, 5-, 6-, 7-, 8-
1s, 2s, 3s, 4s, 5s, 6s, 7s 8s
Ti+
Ti-
Tis
To+
To-
Tos
Ts
S
Earth
The "Tis" and "Tos" terminals are internally connected to terminal "T". Terminals "1s" ... "8s" are
connected internally with terminal "S". The terminals "Earth" are connected to the external
grounding clamp.
22
1
7
F2 housing (4, 6, or 8 outputs)
2 3
4
6 5
Function
Spur (Spur) +
Spur (Spur) -
Spur (Spur), shield
Trunk, input (Trunk In) +
Trunk, input (Trunk In) -
Trunk, input (Trunk In), shield
Trunk, output (Trunk Out) +
Trunk, output (Trunk Out) -
Trunk, output (Trunk Out), shield
Trunks, shield
Spurs, shield
Equipotential bonding