Motorola SURFboard SVG1202 Manual page 45

FIELD
WPA Pre-Shared Key
Show Key
RADIUS Server
RADIUS Port
RADIUS Key
Group Key Rotation Interval
WPA/WPA2 Re-auth Interval
WEP Encryption
Shared Key Authentication
802.1x Authentication
Network Key 1 – 4
Current Network Key
PassPhrase
SVG1202 Wireless Voice Gateway • User Guide
DESCRIPTION
Sets the WPA Pre-Shared Key (PSK); either an 8-63 ASCII character string or a
64-digit hex number. This is specified when the Network Authentication method is
WPA-PSK.
Show Key - displays the WPA Pre-Shared Key. Show Key - displays the WPA Pre-Shared Key. Show Key - displays the WPA Pre-Shared Key.
Sets the RADIUS server IP address to use for client authentication using the
dotted-decimal format (xxx.xxx.xxx.xxx).
Sets the UDP port number of the RADIUS server; default is 1812.
Sets the shared secret for the RADIUS connection; key is a 0 to 255 character ASCII
string.
Sets the WPA Group Rekey Interval in seconds. Set to zero to disable periodic
rekeying.
Sets the amount of time the wireless router can wait before reestablishing
authentication with the CPE.
Enables or disables Wired Equivalent Privacy encryption.
Sends an authentication request to the access point. Then the access point sends a
challenge text to the CPE. The CPE encrypts challenge text which it sends to the
access point. The access point decrypts and compares the message with the original
challenge text. If they are the same, the access point lets the CPE connect; if it does
not match, the access point does not let the CPE connect.
Uses a stronger authentication than WEP.
Sets the static WEP keys when WEP encryption is enabled. Enter five ASCII
characters or 10 hexadecimal digits for a 64-bit key.
Enter 13 ASCII characters or 26 hexadecimal digits for a 128-bit key.
When both WPA encryption and WEP encryption are enabled, only keys 2 and 3 are
available for WEP encryption.
Selects the encryption (transmit) key when WEP encryption is enabled.
Sets the text to use for WEP key generation.
B
37