802.11 Control De Acceso Página - Motorola SURFboard SVG1202 Manual

FIELD
DTIM Interval
Fragmentation Threshold
RTS Threshold
Wireless 802.11 Access Control Page
Configure the Access Control to the AP and status on the connected clients.
FIELD
Wireless Interface
MAC Restrict Mode
MAC Address
Connected Clients
SVG1202 Wireless Voice Gateway • User Guide
DESCRIPTION
Sets the wakeup interval for clients in Power Save mode. When a client is running in Power
Save mode, lower SVG1202 bin values provide higher performance but result in decreased
client battery life; higher values provide lower performance but increased client battery life.
Sets the fragmentation threshold. Packets exceeding this threshold are fragmented into
packets smaller than the threshold before packet transmission.
Sets the RTS threshold. Packets exceeding this threshold cause the AP to perform an
RTS/CTS exchange to reserve the wireless medium before packet transmission.
Field Descriptions for the Wireless 802.11 Access Control Page
DESCRIPTION
Shows the MAC address of the installed wireless card. It is not configurable.
Selects whether wireless clients with the specified MAC address are allowed or denied
wireless access. Select Disabled to allow all clients. wireless access. Select Disabled to allow all clients. wireless access. Select Disabled to allow all clients.
Lists wireless client MAC addresses allowed or denied wireless access based on the
Restrict Mode setting. Valid input MAC address formats are XX:XX:XX:XX:XX:XX and
XX-XX-XX-XX-XX-XX.
Lists connected wireless clients. As a client connects or leaves the network, it is added
to or removed from the list, Age is the amount of time since data was transmitted to or
received from the client.
B
39