Samsung EP-PA710 User Manual page 9

Using the wireless charger
Wired charging
1
Connect one end of the USB cable to the wireless charger's USB charger port. Then, plug
the other end of the USB cable into the mobile device's multipurpose jack.
2
When the mobile device is fully charged, remove the USB cable from the wireless charger
and the mobile device.
Do not cover or block the wireless charger's fan vent.
• Y ou may experience a slower wired charging speed when using the wireless
charger.
• T o save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and be easily accessible while charging.
English (UK)
9
7