Putting Into Operation; Starting The Motor - Scheppach HP800S Translation From The Original Instruction Manual

Putting into operation

Attention: Before the first use fill in oil.
HP1100S / HP1300S
Starting the motor: Fig. 3.1, 3.2, 3.3, 3.4
1 Set the choke to ON (with warm motor to OPEN)
2 Open the gasoline tap
3 Move the gas lever to starting position.
4 Set the start switch to ON, forcefully pull the starter
cable
5 Move gas lever to working position, the vibratory plate
starts to work
6 Motor running, slowly open choke
7 Move gas lever to working position
8 Vibratory plate starts to work
HP1100S / HP1300S
-
23