Temperature Guide - Russell Hobbs 21040-56 Manual

PREPARATION
1. Put the stand on a stable, level surface.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
Press and release the 2 button.
4.
5. The display will show the temperature of the water in the kettle.
The 2 button will flash.
6.
BOILING WATER (100ºC)
Press the u button.
1.
2. 100 will flash on the display.
Press the 2 button.
3.
The 2 button will stop flashing and light up.
4.
5. The display will show the temperature of the water in the kettle.
6. When it reaches the set temperature, the light in the button will go off.
To switch off manually, press 2.
7.
HEATING WATER TO A SELECTED TEMPERATURE
The temperatures available are: 100 (boil), 95, 90, 85, 80, 75, 70, 65, and 60 (°C). Use the °F °C button to
swap between Fahrenheit and Centigrade on the display.
Use the u and d buttons to set the temperature.
1.
Press the 2 button.
2.
3. The display will show the temperature of the water in the kettle.
4. When it reaches the set temperature, the light in the button will go out.
To switch off manually, press 2.
5.
If you set the wrong temperature, and you want to use the kettle again without pouring, and before it
goes to sleep: Press the 2 button twice.

TEMPERATURE GUIDE

Tea Type
Black tea
Whole leaf black tea
Broken leaf black tea
Smoked tea
Flavoured black tea
Green tea
Flavoured green tea
Gyokuro (Japanese tea)
Sencha (Japanese green tea)
Genmaicha (Japanese green tea)
Wu long/oolong/blue/blue-green
Yellow tea
White tea
Coffee
Instant coffee
Ground coffee
Temperature °C
80 – 90
85 – 90
85 – 90
85 – 90
85
60 – 95
60 – 75
50 – 55
65 – 70
90 – 95
80 – 95
70 – 75
70 – 85
Temperature °C
75
95
4
Brewing time (min)
5 – 7
4
5
3 – 4
3 – 4
2 – 5
3 – 4
1
45 seconds to 1 minute
2 – 3
about 7 minutes
2 – 4
7 to 20 minutes
Brewing time (min)
-
-