Advertisement
White tea
TEMPERATURE GUIDE
Green tea
Tea Type
Rooibos
Black
Hibiscus
Oolong
Pu-erh
White tea
Green tea
Mate
Rooibos
Herbal/Fruit
Hibiscus
Coffee
PARTS
Pu-erh
1.
Mate
Anti scale filter
Instant coffee
2.
Lid
Herbal/Fruit
3.
Lid release
Filter ground coffee
Coffee
4.
Infuser
Instant coffee
For baby milk/formula, follow the manufacturer's instructions, or local health author
CONTROLS AND LED DISPLAY
Filter ground coffee
guidance.
To activate a function, touch its icon. The icon will light up brightly and the remaining
icons will be dimly lit to show that they are available for use.
For baby milk/formula, follow the manufacturer's instructions, or local health authority
USING THE INFUSER AND STEEP TIMER
The LED display shows the water temperature, the selected water temperature or the
guidance.
steeping/keep warm time depending on the mode your kettle is in.
The steep timer allows you to time infusions when using the infuser accessory. You
USING THE INFUSER AND STEEP TIMER
Your kettle will revert to the standby mode if no controls are touched or settings
must first heat the water to the desired temperature see HEATING WATER TO A
The steep timer allows you to time infusions when using the infuser accessory. You must
changed within 5 minutes. You can also select standby mode at any time by touching
SELECTED TEMPERATURE. The timer can be set from 1 to 40 minutes.
first heat the water to the desired temperature see HEATING WATER TO A SELECTED
the C icon.
TEMPERATURE. The timer can be set from 1 to 40 minutes.
Note: When using the infuser, only fill your kettle to the 1.5L marking. This will allow
Note: When using the infuser, only fill your kettle to the 1.5L marking. This will allow room for
room for the infuser and its contents when you insert it into the kettle, and prevent
PREPARATION AND FILLING
the infuser and its contents when you insert it into the kettle, and prevent water from being
water from being displaced out of the spout.
displaced out of the spout.
1.
Put the base unit on a stable, level surface.
1.
Prepare the infuser accessory by putting the desired amount of tea leaves into it
2.
Plug the base unit into the wall socket.
1.
Prepare the infuser accessory by putting the desired amount of tea leaves into it.
2.
When the water reaches the desired temperature, open the lid and put the infus
3.
Remove the kettle from the base unit and press the lid release button.
2.
When the water reaches the desired temperature, open the lid and put the infuser into your
into your kettle. The opening in the infuser should face the handle.
4.
Fill with at least 0.5 L of water, but not above the MAX (1.7 L) mark.
kettle. The opening in the infuser should face the handle.
If your kettle is in standby mode, tap the C icon.
5.
Close the lid, and press down to lock it.
3.
Tap the N icon.
3.
Tap the
icon.
Tap the M icon.
6.
Place the kettle onto the base unit.
4.
Turn the select/confirm knob until the desired steeping time is shown on the numerical
The numerical display will show the last selected water temperature.
display. Turning the control slowly will increase/decrease the time in 1 minute intervals.
If your kettle is in standby mode, tap the C icon.
BOILING WATER (100ºC)
Turn the select/confirm knob until the desired temperature is displayed.
Turning the control quickly will increase/decrease the time in 5 minute intervals.
Tap the M icon.
Press the select/confirm knob G to start heating the water.
5.
Press the select/confirm knob
1.
If your kettle is in standby mode, tap the C icon.
The numerical display will show the last selected water temperature.
6.
Turn the select/confirm knob to adjust desired temperature (or skip this step if the current
2.
Tap the K icon.
Turn the select/confirm knob until the desired temperature is displayed.
temperature is already correct).
3.
The numerical display will show the current water temperature which will start to
Press the select/confirm knob G to start heating the water.
7.
Press the select/confirm knob
rise as your kettle starts to boil the water.
4.
8.
When the temperature of the water reaches 100ºC (boiling) your kettle will switch
Your kettle will beep when the time is up. Note that the infusion will start to cool down
naturally after the timer has elapsed.
off.
9.
To cancel at any time you can tap the cancel
5.
To cancel at any time you can tap the cancel Bicon, or lift the kettle off the base.
HEATING WATER TO A SELECTED TEMPERATURE
Your kettle's variable temperature mode allows you to tailor the water temperature to
70 – 80
70 – 85
Temperature °C
90 – 100
90 – 100
70 – 75
70 – 80
80 – 100
70 – 80
70 – 85
90 – 100
90 – 100
90 – 100
70 – 75
Temperature °C
80 – 100
90 – 100
5.
Opening
85 - 95
6.
Base unit
90 – 100
7.
Touch controls and display
80 - 90
Temperature °C
8.
Select/confirm knob
85 - 95
80 - 90
5
. The last used temperature will then be displayed.
to start the countdown.
Temperature °C
icon.
90 – 100
Temperature °C
70 – 80
5
1 – 3
1 - 3
Brewing time (min)
5 - 6
3 - 5
5 - 7
2 – 3
2 - 5
1 – 3
1 - 3
5 - 6
5 - 6
3 - 5
5 - 7
Brewing time (min)
2 - 5
5 - 6
3 - 5
Brewing time (min)
-
-
Brewing time (min)
3 - 5
Brewing time (min)
2 – 3
-
-
Advertisement
