Table of Contents
Advertisement
positioning
1 Put the stand on a stable, level surface.
2 Route the cable so it doesn't overhang, and can't be caught or tripped over.
3 Wind excess cable beneath the stand
filling
caution
keep clear, steam may escape from the lid
4 Remove the kettle from the stand.
5 Press the lid release button to open the lid.
6 Fill with at least 2 cups of water, but not above max.
7 If you overfill, the kettle may spit boiling water.
8 Close the lid, and press down to lock it.
9 Check the lid is closed, or the kettle won't switch off when it boils.
switching on
10 Plug the stand into the wall socket.
11 Put the kettle on the stand – take care not to spill.
12 The buttons will flash twice, then glow steadily.
variable temperature
13 Touch the button marked with the temperature you want.
14 The temperatures available are: 100 (boil), 95 (coffee), 90, 80, 70, and 60 (that's °C).
15 The button will flash.
16 The kettle will start to heat up.
pulsing element
17 Initially, you'll hear the element pulse on, off, and on again, as it works to control the
temperature accurately.
18 When it reaches the set temperature, the button will stop flashing and glow steadily.
19 After 5 minutes, the light will go out, and the kettle will go to sleep.
changing temperature
20 If you get the temperature wrong, and want to change it:
a) touch the correct button
b) the button will flash while the water heats or cools
c) when it reaches the set temperature, the button will stop flashing and glow
steadily
, Reducing the temperature may take a long time – you may prefer to pour the hot
water away, and refill with cold water.
switching off
21 To switch off manually, touch the glowing button again.
22 The lights will go out, and the kettle will go to sleep.
23 To save electricity, unplug the stand.
general
24 Remove the kettle from the stand before pouring.
25 To avoid the risk of splashing, pour slowly and don't over-tilt the kettle.
26 Don't tilt the kettle backwards, water might get on to the control area. If this
happens, let the kettle dry before use – sit it somewhere warm for 12 hours.
4
Hide quick links:
Advertisement
Table of Contents
