Table of Contents
Advertisement
Available languages
Available languages
CONTROLS AND LED DISPLAY
To activate a function, touch its icon. The icon will light up brightly and the remaining icons will be dimly
lit to show that they are available for use.
The LED display shows the water temperature, the selected water temperature or the steeping/keep warm
time depending on the mode your kettle is in.
Your kettle will revert to the standy mode if no controls are touched or settings changed within 5 minutes.
You can also select standby mode at any time by touching the C icon.
PREPARATION AND FILLING
1.
Put the base unit on a stable, level surface.
2.
Plug the base unit into the wall socket.
3.
Remove the kettle from the base unit and press the lid release button.
4.
Fill with at least 0.5L of water, but not above the MAX (1.7L) mark.
5.
Close the lid, and press down to lock it.
6.
Place the kettle onto the base unit.
BOILING WATER (100ºC)
1.
If your kettle is in standby mode, tap the C icon.
2.
Tap the K icon.
3.
The numerical display will show the current water temperature which will start to rise as your kettle
starts to boil the water.
4.
When the temperature of the water reaches 100ºC (boiling) your kettle will switch off.
5.
To cancel at any time you can tap the cancel Bicon, or lift the kettle off the base.
HEATING WATER TO A SELECTED TEMPERATURE
Your kettle's variable temperature mode allows you to tailor the water temerpature to suit specific teas,
coffee and even baby food and milks. The range is adjustable from 40-100ºC.
Heating water to a precise temperature depends on several factors. One of these is the amount of water
you are trying to heat. The final temperature of a small quantity of water may overshoot the desired
temperature. If it is important that the temperature of the water is exact, we recommend using the Keep
Warm feature of your kettle which will allow the temperature of the water to stabilise naturally.
1.
If your kettle is in standby mode, tap the C icon.
2.
Tap the M icon.
3.
The numerical display will show the last selected water temperature.
4.
Turn the select/confirm knob until the desired temperature is displayed.
5.
Press the select/confirm knob G to start heating the water.
6.
To cancel at any time you can tap the cancel Bicon, or lift the kettle off the base.
TEMPERATURE GUIDE
Tea Type
Black
Oolong
White tea
Green tea
Rooibos
Temperature °C
90 – 100
70 – 80
70 – 80
70 – 85
90 – 100
4
Brewing time (min)
3 - 5
2 – 3
1 – 3
1 - 3
5 - 6
Advertisement
Table of Contents
