insys icom ADSL 1.0 Series Manual page 34

Command Reference
Command Description
Display and configuration of the IP address
ip
Displays the IP address of the INSYS ADSL 1.0 or configures it.
The IP address of the INSYS ADSL 1.0 is displayed by entering ip without any
further parameters:
IP : <IP address>
The IP address of the INSYS ADSL 1.0 is configured to <IP address> by entering
ip <IP address>. Response:
IP set
Note: Please make a note of a changed IP address, because otherwise the MI
cannot be accessed any more. Resetting to factory default settings is only possible
via the MI as well.
Display and configuration of the multiplex type
multiplex
Displays the multiplex type of the INSYS ADSL 1.0 or configures it.
The multiplex type of the INSYS ADSL 1.0 is displayed by entering multiplex
without any further parameters (default = 0):
multiplex type : <type>
The multiplex type of the INSYS ADSL 1.0 is configured to the value <type> by
entering multiplex <type>. Valid values are:
Response:
multiplex type set
Display and configuration of the management interface port
port
Displays the MI port of the INSYS ADSL 1.0 or configures it.
The MI port of the INSYS ADSL 1.0 is displayed by entering port without any
further parameters:
Port : <Port No>
The MI port of the INSYS ADSL 1.0 is configured to the value <Port No> by enter-
ing port <Port No>. Response:
Port set
Note: Please make a note of a changed port, because otherwise the MI cannot be
accessed any more. Resetting to factory default settings is only possible via the MI
as well.
34
0 multiplex type LLC
1 multiplex type VCMUX
INSYS ADSL 1.0