Table of Contents
Advertisement
INSTALLATION
Menu language
Country
Automatic installation
Manual installation
Give name
Reshuffle
Favourite programmes
J
SETUP
SETUP
SETUP
J
Digital Sources
Digital sources
Decoder/Descrambler
(Picture tilt)
Information line
Factory settings
Extra front speakers
(Rear speakers)
Auto Surround
Auto format
INSTALLATION
Decoder/Descrambler
J
Programme
Programme
Decoder status
Install TV Setup
The Setup menu allows you to adjust initial settings, i.e. those which are not
related to the installation of the TV channels.
The Setup menu contains items that control the settings of the TV's functions,
features, services and peripherals you may have connected.
Use the cursor in the up/down, left/right directions to select the menu item.
Use the
Use the
Digital sources
See Connect Peripheral Equipment, p. 33 for connecting digital equipment, for
example a DVD, a digital satellite tuner or a similar digital device.
Define Decoder/Descrambler programme numbers
yes/no
If a decoder or a descrambler is connected, see p. 32, you can define one or
more programme numbers as decoder programme numbers.
Press the cursor left/right to select the input used to connect to your
decoder
Select
activated as a decoder programme number.
Select
EXT2
When selecting the decoder, the message EasyLink: Downloading Presets....
appears on the screen.
Picture tilt (if provided)
Select
Keep the cursor left/right pressed to adjust the rotation of the picture.
Information line
When
channel is changed, any programme name broadcast is displayed on the screen
next to the information about sound and picture format.
When
after selecting a TV channel or after pressing the
Factory settings
Select
and sound settings, predefined in the factory.
Extra front speakers
See Connect Extra loudspeakers/ Amplifier, p. 34.
If no extra front speakers/amplifier are connected, do not change the
predefined factory setting which is
Rear speakers
See Connect Extra loudspeakers/ Amplifier, p. 34.
If no rear speakers/amplifier are connected, do not change the predefined
factory setting which is
key to activate.
SELECT/OK
key to return or switch the menu off.
SETTINGS
,
or
.
Off
EXT1
EXT2
if you do not want the selected programme number being
Off
when the decoder is connected to your EasyLink video recorder.
with the cursor up/down.
Picture tilt
is selected, if the
key on the remote control is pressed or the
On
is selected, only sound and picture format information is displayed
Off
and press the
Factory settings
(available according to the type of TV set)
.
No (TV)
key.
key to restore the picture
SELECT/OK
.
No (TV)
Installation
13
Advertisement
Table of Contents
