Table of Contents
Advertisement
Record a TV programme in digital mode
Record analogue channels with your video recorder without EasyLink
Record analogue channels with your video recorder with EasyLink
0
S
Record analogue channels with your video recorder with nexTViewLink
See Setting the timer, p. 29.
Note: In digital mode it is impossible to change channels. The channel on screen is
recorded. You can still watch analogue channels !
To record S-VHS quality, connect an S-VHS peripheral directly to the video
recorder.
Record a TV programme
Select the programme number on your video recorder.
Set your video recorder to record.
See the handbook for your video recorder.
Switching programme numbers on your TV does not disturb recording !
Record a programme on your video recorder connected to
from Audio/Video equipment connected to
EXTERNAL 2
,
EXTERNAL 1
EXTERNAL 3
Switch on the equipment.
Select the right external on your video recorder.
Set your video recorder to record.
You record what you are watching on the screen.
Do not switch programme numbers or do not switch off your TV when you are
recording !
If you have connected an S-VHS video recorder provided with the EasyLink function,
you can record S-VHS quality from an S-VHS peripheral connected to the right side
of the TV. (E.g. from an S-VHS camcorder.)
In TV mode, it is possible to start a direct recording of the programme which is being
displayed on the TV screen.
Press the
record key, under the door of the remote control.
The video recorder switches on from standby and a message of what is being
recorded appears on the screen.
The video recorder starts recording the programme you are watching.
Switching programme numbers on your TV does not disturb recording !
Press the
key to stop the recording.
When recording a programme from a peripheral connected to
, you can not select another TV programme on the screen.
FRONT
To watch TV programmes again, press the programme number you want to select
twice.
Attention: the recording is stopped and your video recorder switches to standby.
If you switch to standby during recording of a programme from a peripheral
connected to
1, 3 or
EXTERNAL
indicates that you are still recording. The blinking stops after the recording is finished.
If your video recorder is equipped with
programmes to be recorded automatically in the
for the TV to be in the standby mode or switched on for the recording to start.
or to sockets on the right side of the TV
, the blinking lamp on the front of your TV
FRONT
TV
Link, and you tagged one or more
NEX
IEW
TV
mode, it is not necessary
NEX
IEW
1, 3 or
EXTERNAL
Record
39
Advertisement
Table of Contents
