Use Of The Remote Control - Philips 32DW9625/05 User Manual

Select peripherals
Press this key repeatedly to select
or , depending on where
EXT2, EXT3 FRONT
you connected your peripherals (p. 37) or to
select Digital or Analogue mode.
TV VCR DVD SAT
Press one of these keys to use the remote
control in the TV, video recorder, DVD or
satellite mode. A green indicator lights up.
n
Analogue - Digital
Press this key to switch between digital or
Video recorder /
Press this key to switch off all digital menus
when in digital mode.
TV
GUIDE
NEX IEW
Press this key to activate your choice,
when in the menus.
When in digital mode, press this key to
display the channel list.The display will show
a total of 6 channels at a time, along with
symbols that identify the status of particular
channels, such as favourite and/or locked
channel. Use the cursor up/down to scroll
through the list or to the next list of 6
channels. Use the cursor left/right to display
the next or previous page at once. Select a
channel and press the
SELECT/OK
switch to that channel.
Press the key to switch off the menu.
EXIT
0/9
To select a TV channel.
For a two or three digit programme number,
enter the second or third digit within 2
To switch immediately to a selected one digit
TV channel, keep the digit key pressed a bit
Previous programme
:The previously selected
In Analogue mode
analogue or digital TV channel is displayed.
:The previously selected
In Digital mode
digital TV channel is displayed.
Operation

Use of the remote control

Use of the remote control
EXT1,
analogue mode.
DVD
see p. 37-38.
EXIT
on/off see p. 17
SELECT
SELECT/OK
key to
Digit keys
P
seconds.
To browse through the TV channels activated in the Favourite Programme
menu.
Note: a red block appears during the search when a new channel is found but
longer.
when there is no broadcasting or when the signal strength is poor. See Technical
information, signal strength.
When you browse to Digital Mode (
return to the list of analogue channels.
SETTINGS
Analogue main menu on/off. See p. 18.
TV VCR DVD SAT
DIGITAL
n
EXIT
GUIDE TEXT
DIGITAL
SETUP
OK
P
1 2 3
4 5 6
7 8 9
SETTINGS
0
S
SOUND PICTURE
Volume Press + or - to adjust the volume.
Mute Temporarily interrupt the sound or restore it.
Programme selection
Standby
The set is switched off and the orange
indicator lights up. After 5 minutes it turns
to red.
To switch the TV on again, press - P + or the
digit keys.
If your EasyLink video recorder has the
system standby function and you press the
standby key for 3 seconds, both the TV and
video recorder are switched to standby.
Continuous subtitles
TV channels often transmit certain
programmes with subtitling.
: Select
For Digital channels
the Viewing Preferences menu, p. 7, or press
to switch subtitles On or Off when a
programme is subtitled.
For Analogue channels
and select the proper subtitle page from the
index. Press to store the subtitle page.
Switch off teletext. Now the subtitle page is
stored for the selected TV channel.
Note: Subtitling has to be selected for each
channel separately.
Each time a programme of the selected TV
channel is subtitled, the subtitling will be
available for that channel.
Press to switch subtitles
select Subtitles On or Off in the Features
menu, see p. 22.When switched On and the
subtitle symbol appears, there are no
subtitles available for that programme.
Note : subtitling is not available when in Dual
Screen mode with teletext.
Teletext on/off see p. 27.
DIGITAL SETUP
main menu on/off see p. 5.
), you will have to press the n key to
DIGIT
Use of the remote control
n in
Subtitles O
: Switch on teletext
or , or
On Off
15 15