Table of Contents
Advertisement
CABLE
EXTERNAL
1
2
3
VCR 1
CABLE
EXTERNAL
1
4
2
Connect Peripheral Equipment
30
Connect Peripheral Equipment
Video recorder
2
4
1
2
3
5
VCR 1
There is a wide range of audio and video equipment that can be connected
to your TV.
The following connection diagrams show you how to connect them.
Connect the aerial cables
eurocable
as shown opposite.
If your video recorder is provided with the EasyLink function, the eurocable supplied
with it should be connected to
functionality.
If the eurocable
is not used the following steps are required:
Search for and store the test signal of the video recorder
Unplug the aerial cable
Switch on your TV and put the video recorder on the test signal.
(See the handbook for your video recorder.)
Search for the test signal of your video recorder in the same way as you
searched for and stored the TV signals. See Installation, Searching for and
storing TV channels, Manual installation, p. 6.
Store the test signal under programme number 0 or between 90 and 99.
Replace the aerial cable in the aerial socket
you have stored the test signal.
Decoder and video recorder
Connect a eurocable
to your decoder and to the special euroconnector
of your video recorder. See also the video recorder handbook.
See Define Decoder/Descrambler prog. numbers, p. 8.
You can also connect your decoder directly to
eurocable.
Video recorder and other equipment
Connect the aerial cables
quality can be obtained if you also connect eurocable
and a eurocable
to
EXTERNAL 1
Look for the test signal of your peripheral in the same way as you do for
a video recorder.
When a video recorder is connected to
programme from your TV.
Only when a video recorder is connected to
programme from your TV as well as from other connected equipment. See Record
with your video recorder, p. 36.
Note:
can handle CVBS and RGB,
EXTERNAL 1
and
only CVBS.
EXTERNAL 3
4
,
and, to obtain the optimum picture quality,
to benefit from the EasyLink
EXTERNAL 2
from the aerial socket
of your video recorder.
of your video recorder after
EXTERNAL 1
(except Digital Sources)
,
and
as shown opposite. Better picture
,
or
.
3
4
you can only record a
EXTERNAL 1
it is possible to record a
EXTERNAL 2
CVBS,Y/C and RGB,
EXTERNAL 2
or
with a
2
to
EXTERNAL 2
Hide quick links:
Advertisement
Table of Contents
