Table of Contents
Advertisement
Wired rear loudspeakers
When no wireless RF surround sound is possible or when there is too much
interference you can still enjoy Dolby Pro Logic and Dolby Digital surround
sound by connecting the two rear loudspeakers to the TV with a stereo cinch
to stereo 3,5 mm jack cable. See Sound Setup, p. 10.
Headphone
Insert the plug into the headphone socket
at the right side of the TV.
Press
on the remote control to switch off the internal loudspeakers
of the TV.
The headphone impedance must be between 8 and 4000 Ohm.
The headphone socket has a 3.5 mm jack.
In the
menu select
to adjust the headphone
Headphone Volume
SOUND
volume.
In case you want to listen via a wireless headphone, see Sound setup, p. 10.
Other equipment
Other equipment can be connected to one of the remaining euroconnectors.
Connect Peripheral Equipment
32
Hide quick links:
Advertisement
Table of Contents
