Table of Contents
Advertisement
Surround settings
Test start
Test stop
Centre volume
Balance
Rear volume left
Rear volume right
3D effect
Surround mode
Surround settings menu
Select
in the Sound menu.
Surround settings
The contents of the Surround settings menu depends on the selected
Surround modes.
Surround settings
•
Test start
•
Test stop
Centre volume
•
Balance
Rear volume left
Rear volume right
3D effect
•
Surround mode
The graphical representation of the speakers is displayed on screen when
controls are being changed or when in test tone mode.
The drawing on screen is updated according to the chosen loudspeaker setup
and the selected surround mode. Speakers which are active are highlighted.
In 3D surround mode the graphical representation of the rear loudspeakers is
replaced by the symbol ®r.The menu item
of the 3D effect can be adjusted.
Note: if extra front speakers are connected and selected in the Sound Setup menu,
all internal TV speakers produce centre sound. See Connect Peripheral Equipment,
Extra loudspeakers/Amplifier, p. 33.
Adjustment of the volume level of the loudspeakers
The menu item
enables you to have a reference of the internal and the
Test
rear loudspeakers loudness.
Select
and press the OK key.
Test start
A steady noise tone is switched sequentially through the available
loudspeakers, for 2 seconds each.This enables you to have a reference of the
loudness of each loudspeaker and to adjust the level of each until they all
sound equally loud.
The loudspeakers activated light up in the screen graphic.
Select
,
Centre volume
Balance
selected adjustments.
Select
and press the OK key when you have finished the
Test stop
adjustment of the speaker levels.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
appears and the level
3D effect
,
or
Rear volume left
right
Use of the menus
•
•
•
•
•
•
and alter the
17
Hide quick links:
Advertisement
Table of Contents
