Using Powerbot; Turning The Power On/Off / Selecting - Samsung POWERbot VR2AR72 Series User Manual

Using POWERbot

You must turn on the emergency switch on the bottom of the unit before using POWERbot.
Turning the power on/off
Press the
• When POWERbot is not used for about 30 minutes, it automatically returns to the
docking station to recharge.
WARNING
Recharging/Energy-saving mode
fRecharging
You can command POWERbot to recharge at the docking station
automatically while it is cleaning by pressing this button.
fEnergy-saving mode
Refer to page 17.
1_VR7200_EN_DJ68-00827B-00_AA.indd 14
button for more than 3 seconds
ENGLISH-14
Starting Auto clean mode
The POWERbot moves and automatically cleans the
set areas only once.
✻ ✻ Stop cleaning: Press and release the
Using Spot clean mode
The POWERbot cleans a localized area intensely.
button
2019-03-19 오후 5:25:27