Chapter 3 Connection; Ethernet Port; Sfp Port; Console Port - TP-Link Jetstream L2 TL-SG5412F Installation Manual

Chapter 3 Connection

3.1

Ethernet Port

Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shows.
Figure 3-1 Connecting the RJ45 Port
RJ45 Port
3.2

SFP Port

The following figure demonstrates the connection of SFP port to an SFP module.
Figure 3-2 Inserting the SFP Module
3.3

Console Port

CLI (Command Line Interface) enables you to manage the switch, thus you can load the CLI after
connecting the PCs or Terminals to the console port on the switch via the provided cable.
JetStream L2 Managed Switch
RJ45 Cable
SFP Slot
SFP Module
Connection 13