finishing
EN
9.6
logo placement
move the backing of the logo supplied and place on the glass viewing
or, as indicated.
Remove the backing of the logo supplied and place as illustrated.
9.7
burner installation
See separate instructions accompanying the burner assembly (sold separately). Keep those instructions along
with this manual.
9.8
remote receiver placement
Position the remote receiver in the valve compartment box. Ensure the receiver is on top of the placement
label, if equipped.
Positionnez le télécommande aux compartiment du soupape près du boîte de dérivation électrique.
Assurez-vous que le télécommande est en haut de l'étiquette de placement, s'il y a lieu.
44
W415-2184 / 06.07.19
"REMOTE RECEIVER PLACEMENT"
APPLIANCE BASE
PLACE REMOTE
RECEIVER ON TOP
OF THIS LABEL
BASE DE L'APPAREIL
PLACEZ LE
TÉLÉCOMMANDE
SUR CETTE
ÉTIQUETTE
½"
(12.7mm)
LOGO
97.1A
JUNCTION
BOX
BOÎTE DE
DÉRIVATION
½"
(12.7mm)