Front Face Kit Installation - Napoleon Vittoria GD19N-2 Installation And Operation Manual

9.1

front face kit installation

WARNING
!
• The components in this kit are heavy. Use care when lifting and ensure they are firmly secured once installed.
• This front facing does not replace the main glass door. Do not operate without the main glass door installed.
• The front facing can be installed flush with a counter, floor, or hearth.
Remove the safety barrier and glass door (see "safety barrier & glass door" section).
A.
Install the side brackets, ensure the front face is on a soft surface to avoid any damages during bracket
B.
installation (Fig. 1).
Install the safety barrier, spline up (Fig. 2 & 3).
C.
Install the decorative facing trim (Fig. 4).
D.
Install the 4 screws with spacers into the sides of the firebox (Fig. 5).
E.
Place the front facing onto the appliance by hooking the its brackets over the screws and spacers (Fig. 6).
F.
Install the rest of the top trim and control panel (Fig. 7).
G.
Fig. 1
Fig. 3
Fig. 2
Fig. 4
W565-0094 W565-0094
W715-0745 W715-0745
EN
W565-0094 W565-0094
W715-0744 W715-0744
39
W415-2184 / 06.07.19