Operation On Public Telephone Systems - Gigaset DA410 Overview

Gigaset DA410 / en en/ A30054-M6529-R101-2-6Z19 / DA410_en_IM-EU.fm / 29.11.2011
Changing the dialling mode
c K
#
2
/
K &
Changing the flash time
You can change the flash time if the
dialling mode is set to tone dialling
c K
(see above).
O 5
Q 5
...
K &
Temporary tone dialling switching
in "Pulse" position
To use functions that require tone
dialling (e.g. remote control of
answering machine), you can set the
telephone to tone dialling for the
duration of the call without adjust-
ing the switch.
*
After the connection is established:
After the connection is broken, the
setting reverts to pulse dialling.
Lift the handset, press
the set key.
Press the hash key.
Tone dialling: Press the
number 1 key.
Pulse dialling: Press the
number 2 key.
Press the set key, hang
up the handset.
Lift the handset, press
the set key.
Press the number keys
1, 9 and 5.
Press the number key
for the flash time you
£
want (for possible val-
ues, page 8).
Press the set key, hang
up the handset.
Press the star key.
7
en
Operation on public
telephone systems
Public telephone systems – in some
cases by special request – offer you a
range of useful additional services
(e.g. call divert, call back on busy,
three-party conference etc.). These
services can be selected using speci-
fied key combinations, which your
network provider will notify you of.
You can save the entire key combina-
tion, including the number of a fixed
call divert destination, to your reper-
tory or speed dial keys just like a nor-
mal number.
Recall key
In public telephone systems, the
recall key is required to use certain
additional services; e.g. for "Call back
on busy".
You may need to adjust the flash
time of your telephone to the needs
£
of the public telephone system
( page 7).