Table of Contents
Advertisement
c
Follow the instructions which came with the LXMM to
install the ESP-LX Series controller into the metal case.
d
Route the antenna cable through the knockouts
on top of the metal case and the controller. Set the
antenna into the hole and secure from the inside as
shown, using the washers and nut provided.
638085-02_20JA20_IQ-NCC user manual.indd 15
638085-02_20JA20_IQ-NCC user manual.indd 15
d
C
WARNING
To comply with FCC RF safety exposure limits, the
antenna used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all
persons and must not be located or operating in con-
junction with any other antenna or transmitter.
IQ Network Communication Cartridge
ENG
15
1/20/2020 11:20:31 AM
1/20/2020 11:20:31 AM
Advertisement
Table of Contents
