General Rules - netsys NH-310S User Manual

NV-310M/S EOC Master and Slave USER'S MANUAL Ver. D2

3.3 General Rules

Before making any connections to the device, take note the following rules:
Ethernet Port (RJ-45)
All network connections to the Master Ethernet ports must be made using Category 5 UTP or above for 100
Mbps, Category 3, 4 UTP for 10Mbps.
No more than 100 meters of cabling maybe use between the MUX or HUB and an end node.
HCNA Port (Coaxial)
All Home network connections we recommend use RG59 75ohm coaxial cable and link establish under -145dBm/Hz noise
floor.
Diplexer / Multi-Splitter
All Home network connections could be use Diplexer or Multi-Splitter or use mix of them as you would like to connect
an Slave device. Please choose according to different environments to different specifications of the Diplexer (5MHz-45MHz,
47MHz-1GHz) or Multi-Splitter (5MHz-1Ghz).
Attenuator
Establish the basic link for NH-310M and NH-310S, please add a attenuator (at least -10 dB 5M-850MHz).
Attenuator
Diplexer
Multi-Splitter
13