To view product warranty information, go to the following website: www.digi.com/howtobuy/terms Safety The XBee 3 USB Adapter is not a toy and should only be used under adult supervision. Customer support Gather support information: Before contacting Digi technical support for help, gather the following information: Product name and model...
Page 3
To provide feedback on this document, email your comments to techcomm@digi.com Include the document title and part number (Digi XBee® 3 USB Adapter User Guide, 90002331 A) in the subject line of your email. Digi XBee® 3 USB Adapter User Guide...
Contents Safety About the XBee 3 USB Adapter Compatibility with other XBee devices LEDs Technical specifications Environmental specifications Power requirements Dimensions RF operation specifications RF performance specifications Networking and security specifications Regulatory conformity summary Configure the XBee 3 USB Adapter...
Simply plug the XBee 3 USB Adapter into the USB port of a laptop or PC for instant access to an Digi XBee network and its connected devices. This compact, USB-powered wireless adapter enables local network configuration, diagnostics or device monitoring.
XBee 3 USB Adapter is programmed with, it will not be able to connect to your network. You can change the firmware on the XBee 3 USB Adapter through XCTU.
Technical specifications The following tables provide general specifications for the XBee 3 USB Adapter. Environmental specifications Power requirements Dimensions RF operation specifications RF performance specifications Networking and security specifications Regulatory conformity summary Digi XBee® 3 USB Adapter User Guide...
Technical specifications Environmental specifications Environmental specifications The following table provides the environmental specifications for the XBee 3 USB Adapter. Specification Value Operating temperature -40°C to +85°C (-40°F to +185°F) Relative humidity 5% to 95% (non-condensing) Power requirements The following table describes the power requirements for the XBee 3 USB Adapter.
Serial interface data rate (software selectable) 1200 b/s - 921.6 kb/s XBee 3 receiver sensitivity -103 dBm Networking and security specifications The following table describes the networking and security specifications for the XBee 3 USB Adapter. Specification Value Supported network topologies DigiMesh, 802.15.4, Zigbee...
Regulatory conformity summary Regulatory conformity summary Approval United States (FCC Part 15.247) Approved, contains FCC ID: MCQ- XBEE3 Innovation, Science and Economic Development Canada Approved, contains IC: 1846A-XBEE3 (ISED) European compliance CE marked Digi XBee® 3 USB Adapter User Guide...
Configure the XBee 3 USB Adapter Connect the XBee 3 USB Adapter Programming options Configure the XBee 3 USB Adapter Hardware reset Digi XBee® 3 USB Adapter User Guide...
Connect the XBee 3 USB Adapter Plug the XBee 3 USB Adapter into the USB connector of a PC. Do not use a USB extension cable. The XBee 3 USB Adapter requires a device driver, FT232R. To download this device driver, go to ftdichip.com/drivers/vcp.htm...
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Europe (CE) The XBee 3 USB Adapter conforms to the Radio Equipment Directive (2014/53/EU). A declaration of conformity is at: digi.com/resources/certifications. Digi XBee® 3 USB Adapter User Guide...
Need help?
Do you have a question about the XBee 3 and is the answer not in the manual?
Questions and answers