Control Panel - Epson STYLUS SCAN 2500 User Manual

Control panel

You can control copy, print and scan functions with the control
panel, and also check device status.
There are four control panel operation modes. LCD panel
messages and operation vary by mode.
Copy Mode
Set-up
Mode
Status
Mode
Menu Mode
Paper Size Darker/Lighter
Scan
Reduce/Enlarge B&W/Color
This is the normal mode, and in this mode the system is ready
to make a copy.
The LCD will display the following items:
Reduce/Enlarge, B&W/Color, Quality, Copies
This mode is used to change Copy settings.
Use this mode to change settings with the panel buttons.
The system switches to this mode when the Stylus Scan is
performing an action (print, scan or copy).
Error and status messages are displayed.
Hold down the Quality and B&W/Color buttons for 3 seconds
to enter this mode. It is used to set the following items:
Status sheet, bottom margin and Metric/US select
Panel language select, Restore defaults
Quality Copies
Hold for Menu Return Item
Stylus Scan Parts and Functions
Copy
Stop/Clear
Error
Set
Operate
1-3