Electrical Safety; Fitting Accessories - Black+Decker BV2000 Manual

• Always work from bottom up when using the appliance
on stairs, and keep the appliance at least a stair below
your working position.
• Do not use the appliance without the suction head or
another suitable accessory mounted to the tube.
• Keep your hair, clothing and gloves away from moving
parts.
• Do not use damaged accessories.
• Use only BLACK+DECKER accessories.
• Do not use the appliance on animals.
• Disconnect the product from the electrical supply before
emptying, cleaning or carrying out any maintenance on
the appliance.
Safety of others
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not
play with the appliance.

Electrical safety

This appliance is double insulated; therefore no
earth wire is required. Always check that the
power supply corresponds to the voltage on the
rating plate.
Power plugs must match the outlet. Never modify the plug in
any way. Unmodified plugs and matching outlets will reduce
risk of electric shock.
• If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised BLACK+DECKER
Service Centre in order to avoid a hazard.
Labels on appliance
The following symbols appear on this appliance along with
the date code:
Do not use this appliance to pick up water or
liquids.
Features
This Appliance includes some or all of the following features.
1. On/Off switch
2. Motor
3. Barrel filter bag
4. Castor wheels (x2)
(Original instructions)
5. Locking catch (x2)
6. Hose port
7. Main body
8. Wheels (x2)
9. Crevice tool
10. Flexible hose
11. Hose connector
12. Airflow adjust
13. Hose handle
14. Floor head
15. Function change pedal
16. Brush accessory
17. Vacuuming tube
18. Telescopic tube
Assembly
Connecting the castors and wheels to the
main body (fig. A)
• Insert both the large wheels (8) into the receptacles (8a)
until they click firmly into place.
• Insert both the castor wheels (4) into the receptacles (4a)
until they click firmly into place.
Connecting the hose (fig. B)
• Insert the hose connector (11) into the hose port (6) on
the front of the main body of the appliance.
• Press firmly until it clicks into place.
Disconnecting the hose (fig. B)
• Press the hose release buttons (11a).
• Pull the hose connector (11) out of the hose port (6) of
the appliance.
Fitting the vacuuming tube (fig. C)
• Firmly push and twist the hose handle (13) in to the
vacuuming tube (17).
Note: Both of the supplied accessories (crevice tool (9) and
brush (16) can be attached in this manner.

Fitting accessories

Your vacuum cleaner comes equipped with two attachments
intended for different applications. Each individual attachment
can either be fitted onto the vacuuming tube (17) or directly
onto the hose handle (13), as required.
Crevice attachment (9)
The crevice tool (9) allows for vacuuming in narrow and
hard-to-reach places.
ENGLISH
7