Electronic Device Connections And Functions - Jacuzzi J-LXL Installation Manual And Use & Maintenance

Table of Contents

Advertisement

Available languages

Available languages

Usb mode: Press to play songs in a random order
Radio mode:Not used

Electronic Device Connections and Functions

CAUTION: RISK OF ELECTRICAL SHOCK OR EQUIPMENT
DAMAGE! Never install, remove or operate any electrical de-
vice (e.g.Apple Device/MP3/USB/AUX/Bluetooth) while
hands are wet or while sitting partially or fully immersed in
the spa!
IMPORTANT: If stereo unit is "ON" (blue light is illuminated on the
stereo power button) then press the power button on the re-
mote once.
If stereo unit is in "Standby" (red light is illuminated on the stereo
power button) then press the power button on the remote once
to activate the remote (remote LCD display will read "NO LINK").
Press the button again to activate the stereo unit (remote LCD dis-
play will read "WELCOME").
Operating the Radio:
Turn power ON to the stereo unit and remote.
The LCD screen on the remote will display the fol-
lowing: "Welcome," "Load," "Radio" and the station
number.
You can use the seek button to search for frequencies. You can
save up to 3 stations as presets.
Follow the steps below to set a station:
a. Find a station you want to save.
b. Press and hold one of the three preset buttons. The station
number on the display will quickly flash to confirm the setting.
To set the additional two stations, conduct this step again.
Connecting Your Apple Device and MP3 Player Using the
USB:
- Locate the USB port in the stereo locker.
- Use a cable with an adapter (30 pin-USB) and plug the USB end
of the cable into the connector on the stereo.
- Connect the other end of the cable to the Apple/MP3 device
(not supplied).
USB
USB
A
AUX
UX
Note: Digital Rights Management (DRM) Files cannot be played on
this deck. The files (MP3, WMA, iTunes or AAC) can only be played if
they are DRM encrypted.
Operating USB/MP3/Apple device.
- Turn power ON to the stereo unit, the player and the stereo re-
mote.
- The LCD screen on the remote will display the following: "Wel-
come," "USB," "Load," "Apple" (final display will vary depending on
the device connected). All functions are performed through the
remote.
- While the music is playing the remote screen will display and-
continually scroll through the following: Artist, Album, Song
and Track information.
- For operational functions refer to the "External Media Device
Playback" section.
Operating the USB drive:
- Plug in your USB device into the "USB" connection on the stereo.
- Turn power ON to the stereo unit and the stereo remote.
- The LCD screen on the remote will display the following: "Wel-
come," "USB," "Load," "TOL XX" (final display will vary depending
on the whether the USB holds folders or files). All functions are
performed through the remote.
- While the music is playing the remote screen will display and-
continually scroll through the following: Title, Song, Artist, Al-
bum, Dir, Music and Track information.
- For operational functions refer to the "External Media Device
Playback" section.
Connecting Your Auxiliary Player Using the 3.5 mm Cable:
- Plug one end of the cable to "Aux" connection on the stereo.
- Plug the other end of the cable into the phone jack connection
on the Apple device/MP3 Player.
- Press the Mode button on the remote to "AUX IN".
- All playback operations are conducted via the Auxiliary Player.
The stereo remote functions do not work on the external Aux-
iliary Player (except volume control).
Connecting Your Bluetooth Device:
- Turn power ON to the stereo unit.
- From your Bluetooth device, make sure the Bluetooth feature is
ON.
- Follow the pairing instructions for your Bluetooth device and
connect to the "BLUEWAVE" device that appears on your screen.
- When asked for a password, enter the code "0000."
- The remote LCD screen will display, "BT AUDIO" if the process
was successful.
Operating Your Bluetooth Device:
- Press the seek + or - buttons to scroll through the tracks (on the
USB
USB
A
AUX
UX
remote).
- Press the volume + or - buttons to adjust volume level between
ACCESSORY CONNECTED
C
C
E
S
S
O
R R Y
Y Y
CO
NN
EC
TE
0 to 30 (on the remote).
- Any other playback operations are conducted via the Bluetooth
device.
50

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J-lx

Table of Contents