Polygroup SUMMER WAVES Series Owner's Manual page 11

Elite rectangular frame pool for above ground swimming pools, 18' - 24' (5.49m - 7.32m) models
Hide thumbs Also See for SUMMER WAVES Series:
Table of Contents

Advertisement

Available languages

Available languages

OWNER'S MANUAL
POOL MAINTENANCE & DRAINAGE
CAUTION
: ALWAYS FOLLOW THE CHEMICAL MANUFACTURER'S DIRECTIONS, AND THE HEALTH AND HAZARD WARNINGS.
Do not add chemicals if the pool is occupied. This can cause skin or eye irritation. Concentrated chlorine solutions can damage the pool liner. In no event is
Polygroup
, the buyer, or any other party liablefor costs associated with the loss of pool water, chemicals, or water damage. Keep spare filter cartridges on hand.
®
Replacecartridgeseverytwoweeks. Werecommendthe use of Polygroup
Filter Pump with all of ourabove-ground-pools. Topurchase a Polygroup
Filter Pump or
®
®
otheraccessories,visitourwebsiteorcallPolygroup
ConsumerServices.
®
EXCESSIVE RAIN: Toavoid damage tothe pool and over filling, immediately drain rain water that causesthe water levelto be higher than the maximum.
How to DrainYourPool and Long TermStorage
1. Checklocalregulationsforspecificdirectionsregardingdisposalofswimmingpoolwater.
2. Make sure the drain plug inside the pool is plugged in place.
3. Twist off the cap of the drain valve on the outside of the pool.
4. Attach a 5/8" garden hose to the drain valve.
5. Place the other end of the garden hose in an area where the water can be safely drained away from the house and other nearby structures.
6. Unplug the inner cap of the to start draining the pool.
7. When the water stops draining, start liftingthe pool from the side opposite the drain, leading any remaining water to the drain and emptying the pool completely.
8. Replace drain cap on outside of pool.
9. Completelydeflatethetopring, andremoveallconnectingparts.
10. Be sure that the pool and all parts are completely dry before storage. Air dry the liner in the sun until completely dry before folding (see drawing 1). Sprinkle
sometalcum powderto prevent the vinylfrom stickingtogether andto absorb any residual moisture.
11. Create a square shape. Starting at one side, fold one-sixth of liner into itself twice. Do the same on the opposite side (see drawings 2 & 3).
12. Once you have created two opposing folded sides, simply fold one over the other like closing a book (see drawings 4 & 5).
13. Fold the two long ends to the middle (see drawing 6).
14. Fold one over the other like closing a book, and finally compact the liner (see drawing 7).
15. Store the liner and accessories in a dry,temperature controlled storage location, between 0ºC(32 ºF) and 40 ºC (104ºF).
16. The original packing can be used for storage.
1
2
3
5
6
7
4
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents