Table of Contents SECTIONS INTRODUCTION HSL Secure Isolators The secure Isolator prevents vulnerable peripherals from mediating between compromised and secure computers by ensuring that video and audio flow in a single direction. HSL Secure 2-Port KVM Combiner Quick Setup Guide...
Table of Contents SECTIONS INSTALLATION Connecting the Isolator Step 1 - Connect the PC to the Isolator’s PC SIDE: Audio connection: For all models, connect the PC to the Isolator’s AUDIO IN port, using a 1/8" (3.5mm) stereo plug. Video connection: For all models, connect the PC to the Isolator’s VIDEO IN port, using the corresponding video cable (VGA/HDMI/DVI/DP).
Page 5
Table of Contents SECTIONS INSTALLATION Step 2 - Connect the peripherals to the Isolator’s CONSOLE SIDE: Audio connection: For all models, connect the speakers to the Isolator’s AUDIO OUT port. Note: If either LED remains OFF, the Isolator does not recognize the device;...
Page 6
Table of Contents SECTIONS INSTALLATION Step 3 - Power ON the Isolator For all models, connect the power adapter to the Isolator’s PC SIDE, DC IN port. Power ON the Isolator by plugging it into an AC wall outlet. The PC SIDE Power LED should light continuously. If not, check the connections.
Table of Contents SECTIONS OPERATION Running an EDID Capture Before using the Isolator, run a one-time EDID capture. This Note: An EDID capture needs to be performed for new installations and prevents the continuous transfer of potentially malicious data - when changing a display.