Page 1
Sit-u-Up user instructions Simple solutions for everyday independence...
Page 2
(detail fig. 1) and an equal distance from the tab on each side as indicated (Fig. 2). • Place the Sit-u-Up on the bed with the spreader bar positioned against the headboard. Lead the air hose (C fig.3), to the side of the bed where the Airflo compressor is to be placed and fold the strut (D fig.3) towards the headboard.
Page 3
(G). • Place the Airflo by the side or under the bed, in an out of the way position. • Inflate the Sit-u-Up by pressing ‘up’ on the hand control (see separate Airflo compressor instructions). Assembling the overlay •...
Sit-u-Up • Fit the assembled overlay (L fig.7) to the Sit-u-Up by sliding it over the top of the headrest. • Tuck the lower flap (M fig.8) underneath the Sit-u-Up. • Position your pillow on the Sit-u-Up as indicated (fig.8) and wrap the flap (N) completely around the pillow to hold it in place.
Allow to dry thoroughly before inserting back into quilt. Storage Ensure that the Sit-u-Up is thoroughly dry before storing. Store deflated in a dry place. Keep these instructions in a safe place for future reference. 57cm...
Page 6
Annual Service and Clean package. To find out more about this service please call our Customer Service Department on Freephone 0800 2800 485. Mangar International reserves the right to alter product specifications and/or any of the information contained within this document without notice.
Sit-u-Up DECLARATION OF CONFORMITY This is to certify that:- The Sit-u-Up HV0032 complies with:- The requirements for Class 1 devices of the Medical Devices Directive 93/42/EEC as amended by 2007/47/EC Signed: Date: October 2009 A. Barker Managing Director Mangar International Presteigne, Powys, Wales, UK.
Need help?
Do you have a question about the Sit-u-Up and is the answer not in the manual?
Questions and answers