Mangar AB0006 User Instructions

Bath Board - User Instructions
(Model: AB0006)
The Bath Board by Mangar International provides a safe and stable seat or transfer platform for use
when bathing or showering.

Contents

1 x Bath Board platform (A).
2 x Clamping brackets (B).
2 x Wing nuts (C).
1 x User instructions.

WARNINGS

• Ensure that the Bath Board does not
overhang the outer edges of the bath.
• The bath rim must be wide enough to
support at least 4cm (1½") of each end of
the Bath Board.
• The user must not exceed 200kg (31st).

Assembly

• Position the two clamping
underside of the Bath Board platform as
illustrated (B) and loosely fasten the two
wing nuts (C).

Fitting the Bath Board to the Bath

1. Position the Bath Board across the bath
so that it sits equally on the rim of the bath
on each side.
2. Slide the clamping brackets so that they
make contact with the sides of the bath
(as illustrated by arrows) and tighten the
wing nuts.
3. Check that the Bath Board feels secure
and cannot be easily moved when pulled
forwards, backwards or sideways.
freedom through lightweight solutions
B
brackets on the
A
C
MI0239 issue 1
B