Page 2
If the Surfer Bather is to be used in a different bath from that in which it is normally used, check for suitability of use and that the suction cups adhere properly.
Page 3
Surfer Bather in the bath (fig.1). • Place the deflated Surfer Bather in the bath so that the rear of the platform is as close to the non-tap end of the bath as it will go without resting on the curve of the bath (A fig.2).
Page 4
MI0132 issue 6 Fitting/Adjustment of Backrest and Platform Pad • The backrest and the platform pad are secured to the platform by means of plastic lugs inserted into keyhole slots. Locate and slide the lug into the slot as indicated (1 & 2 fig.4), press the locking tag down so that it ‘clicks’...
Page 5
To aid removal from the bath, the platform should be separated from the scissor lift. Partially elevate the Surfer Bather and pull the locking catch levers fully out (see fig.1) to unlock the platform from the scissor lift. Unclip the platform from the scissor lift (1 fig.8).
Page 6
Rinse after disinfecting - Do not dry using hot air. STORAGE - Ensure that the Surfer Bather is thoroughly dry before storing. Store deflated and in a dry place. Keep these instructions in a safe place for future reference.
To find out how we can provide complete cover for your Mangar International product call our Customer Care Department on Freephone 0800 280 0485. Mangar International reserves the right to alter product specifications and/or any of the information contained within this document without notice. freedom through lightweight solutions...
Need help?
Do you have a question about the surfer bather and is the answer not in the manual?
Questions and answers