Instant Pot DUO PLUS Getting Started Manual page 11

3
Remove & Install Float Valve
The float valve has 2 positions. It pops up
to indicate when the cooker is pressurized,
and lowers into the lid when the cooker
is depressurized.
Remove: Place one finger on the flat top of float
Pressurized Depressurized
valve. Turn lid over. Detach silicone cap from
bottom side of float valve. Remove float valve
from top of lid. Do not discard float valve or
silicone cap.
The float valve and silicone cap must be
installed before use to seal in pressurized steam.
Clean after each use.
Top Bottom
Install: Drop float valve into float valve hole on
top of lid. Place one finger on the flat top of float
valve. Turn lid over. Attach silicone cap to bottom
of float valve.
While float valve is up, contents of cooker are pressurized. Do not attempt to remove lid. Refer to "Venting Methods" section in this Guide for
CAUTION
information on releasing pressure.
11
Getting Started |