1. Manuals
  2. Brands
  3. Grandio Manuals
  4. Greenhouse Kit
  5. Grandio Element 6x8 with Base Kit
  6. Manual

Grandio Element 6x8 with Base Kit Manual

With 4’ extension kit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GRANDIO
®
G R E E N H O U S E S
2016 GRANDIO ELEMENT WITH BASE KIT 6X4, 6X8 & 4' EXTENSION KIT MANUAL
STOP
This manual is for
Element models with
Grandio Element 6x8 with Base Kit
Base Kits for sizes, 6x4,
Shown In Image
6x8 and adding on 4'
GREENHOUSE USER MANUAL
extension kits to
either model.
© 2015 Grandio Greenhouses, Backyard Living Source Inc. All rights reserved
February 2, 2016 Extendable Models

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Grandio Element 6x8 with Base Kit and is the answer not in the manual?

Questions and answers

Related Manuals for Grandio Grandio Element 6x8 with Base Kit

Summary of Contents for Grandio Grandio Element 6x8 with Base Kit

  • Page 1 GRANDIO ® G R E E N H O U S E S 2016 GRANDIO ELEMENT WITH BASE KIT 6X4, 6X8 & 4’ EXTENSION KIT MANUAL STOP This manual is for Element models with Grandio Element 6x8 with Base Kit...
  • Page 2 Save this owner’s manual for future a permit or documentation before you build. reference and if you need our help. Contact your insurance company to make sure your Grandio Greenhouse will CONTACT OUR CUSTOMER SERVICE be covered on your policy.
  • Page 3 Before beginning assembly, read the instruc- tions and identify all parts using the hardware identifier and parts list on pages 57-64. Complete assembly and proper usage are essential to reduce the risk of accident or injury when using your Grandio Greenhouse. CAUTION:...

  • Page 4: Table Of Contents

    ASSEMBLY INSTRUCTION STEPS Introduction................1 Safety Instructions..............2 Prepare For Assembly............4 Box Con gurations ...............6 PREPARE FOR ASSEMBLY Diagrams of Assembled Grandio Sizes 6x4, 6x8, 6x12............7-9 Base Kit Assembly Information........10 STEP ONE: BASE ASSEMBLY Base Kit Parts Lists...............12 6x4 Base Kit................14 6x8 Base Kit................15 6x12 Base Kit................17...

  • Page 5: Base Kit Assembly Information

    PREPARE FOR GREENHOUSE ASSEMBLY IMPORTANT: BASE KIT ASSEMBLY & IMPORTANT: POLYCARBONATE PANELS GREENHOUSE PLACEMENT The UV-Protected side is covered with clear lm and Before assembling your new greenhouse, a proper must face toward the sun. The side covered in white lm foundation must be prepared.
  • Page 6 *SEE BASE KIT ASSEMBLY SECTION FOR ALL 6x4 GRANDIO ELEMENT A-FRAME STYLE GREENHOUSE BASE DIMENSIONS ON PAGES 14-17. GREENHOUSE WITH DIRT MOUNT BASE KIT DIMENSIONS * INTERIOR DOOR DIMENSIONS: 27 ” WIDE X 69” HEIGHT ” 2254 mm * 1 ROOF VENT WITH 6X4...

  • Page 7: 6X4 Base Kit

    We suggest you lay the parts out on a tarp so you do not lose items in the grass or dirt near your building site. *See the reference diagrams on pages 7-9 for more information about how the parts will go together and what makes up each section for the assembly. GRANDIO ELEMENT 6X8 GRANDIO ELEMENT 6X4 Element 6’x4’...
  • Page 8 BA-S7 DIAGRAM SHOWS THE ASSEMBLED (6’x4’ BASIC CONFIGURATION) (GRA-ELE-64A & GRA-ELE-64P & GRA-BAS-68) L08A 6x4 ELEMENT KIT INCLUDES, FRONT, BACK, AND SIDE WALLS. 606-WS 606-WS 606-WS GROUND BASE KIT IS SOLD SEPARATELY. 602D 602D LEFT SIDE RIGHT SIDE 601A-B 601A-B L08A-X L08A-X 603C...
  • Page 9 BA-S7 DIAGRAM SHOWS THE ASSEMBLED (6’x8’ BASIC CONFIGURATION) (GRA-ELE-68A & GRA-ELE-68P & GRA-BAS-68) L08A 6x8 ELEMENT KIT INCLUDES, FRONT, BACK, AND SIDE WALLS. 606-WS 606-WS 606-WS GROUND BASE KIT IS SOLD SEPARATELY. 602D 602D LEFT SIDE 601A-B RIGHT SIDE 601A-B L08A-X L08A-X 603C...
  • Page 10 BA-S7 DIAGRAM SHOWS THE ASSEMBLED L08A (6’x8’ BASIC CONFIGURATION WITH A 4’ Extension) 609-L 606-WS 606-WS 606-WS 610-L 609-R 610-R 602D 602D L08C-X 601A-B L08A-X L08A-X 606-WS 603C/616 606-WS 603C 603C 603C 602B 602A 601A-B 602A L08B Y4-1 Y4-2 602B 606-WS 606-WS L08C-X...
  • Page 11 We recommend you use anchoring bolts to secure your structure. For Earth Installation: We recommend you use the Grandio Base Kit with the BA-A1 / L-BOLT anchoring system. With this method you will bury the L-Bolts into the ground and secure into place with quickrete.
  • Page 12 FOLLOW THE STEPS IN THIS SECTION AND USE PROVIDED HARDWARE TO SECURE YOUR DIRT MOUNT BASE KIT TO YOUR SURFACE. IF YOU ARE INSTALLING INTO AN EARTH SURFACE USE THE GRANDIO BASE KIT WITH THE BA-A1 / L-BOLT ANCHORS. YOU MAY ALSO MOUNT THE DIRT MOUNT BASE KIT TO A WOODEN DECK OR CONCRETE SLAB IF YOU DESIRE THE EXTRA STRENGTH AND HEIGHT THE BASE KIT OFFERS.
  • Page 13 DIRT MOUNT BASE KIT PARTS LIST FOR 6x4, 6x8 and 6x12 **Locate the parts listed below to prepare and install your dirt base kit to your prepared surface (GRA-BAS-4X) BASE AND ACCESSORY PACKING LIST (GRA-BAS-64) (GRA-BAS-68) BASE AND ACCESSORY PACKING LIST GRAPHIC PART NAME SIZE/LOCATION...
  • Page 14 6x8 BASE KIT ASSEMBLED WITH ANCHORS (GRA-BAS-68) IMAGE SHOWS A 6’ x 8’ DIRT MOUNT BASE KIT WITH L-BOLT ANCHORS FOR EARTH INSTALLATION BACK RIGHT FRONT LEFT...
  • Page 15 6x4 BASE KIT ASSEMBLY INSTRUCTIONS (GRA-BAS-64) Layout all base kit pieces to prepare for assembly of a 6x4. Note that one BA-S7 will be at the front and one will be at the back and for the 6x4 there will be BA-S8’s on the sides. See diagram DIAGRAM SHOWS A 6’...
  • Page 16 6x8 BASE KIT ASSEMBLY INSTRUCTIONS (GRA-BAS-68) Layout all base kit pieces to prepare for assembly of a 6x8. Note that one BA-S7 will be at the front and one BA-S7 will be at the back. For the 6x8 Element kit you will have BA-S2’s on both sides. See DIAGRAM SHOWS A 6’...
  • Page 17 6x4 & 6x8 BASE KIT ASSEMBLY INSTRUCTIONS Slide the BA-C3 into the BA-S7, slide the BA-S2 or BA-S8 into the BA-C3, align the holes and push together to an even and tight position and use the BA-S03 bolt and BA-M03 collard nut combo, tighten the collard nut on the inside of the base kit using the 10mm wrench or nut driver.
  • Page 18 HOLE FOR HOLE FOR BA-S2 ANCHOR ANCHOR BA-C3 BA-S7 Note that the holes for BA-S10 GRANDIO BA-C3 T I P HOLE FOR BA-C4 HOLE FOR screws on the base kit ANCHOR ANCHOR sides have about a 2 foot gap between...
  • Page 19 BASE KIT ASSEMBLY INSTRUCTIONS Slide the BA-C3 into the BA-S7, slide the BA-S2 into the BA-C3, align the holes and push together to an even and tight position and use the BA-S03 Bolt and BA-M03 Collard Nut combo, tighten the collard nut on the inside of the base kit using the 10mm wrench.
  • Page 20 See www.GrandioGreenhouses.com for other anchoring kit options. Outdoor Ground Assembly BA-S7 BA-S2 Make sure base is squared GRANDIO T I P and level before setting BA-S03 anchor into concrete. Use a measuring tape BA-A1 * Must be inserted to ensure all corners are the same. Use level...
  • Page 21 If surface is uneven you may want Make sure base is squared GRANDIO T I P to purchase large washers that and level before setting will fit under the base and allow anchors.

  • Page 22: Front Assembly

    W02-T We recommend watching 603A GRANDIO T I P our how to assembly videos with tricks and tips for easier assembly and Y2-2 installation of your Grandio Greenhouse at: Y2-1 www.grandiogreenhouses.com L08D L08D 603B 603B Lay at on ground to...
  • Page 23 FRONT FRAME ASSEMBLY CONTINUED ALWAYS ASSEMBLE FRONT HORIZONTAL If using the moisture control kit with anti dust tape you will apply it now following the kits directions. Pre thread W08 and W02 fasteners with S05 for ease of installation, only turn a few times. See Fat End on the W02’s will always face downward.
  • Page 24 If necessary you may use a screwdriver to wedge behind the bolt head. This prevents bolt from falling into the track. BOLT INSTALLATION TIP: GRANDIO T I P Locate all nuts and bolts, pre thread and place in the groove of the extrusion to make installation easier.
  • Page 25 Insert the Y2-2 and Y2-1 polycarbonate panels into 603B 603B the track of the 603B. See 601A 601A 606-WS-SHORT 606-WS-SHORT 603B Inside View L08D L08D GRANDIO Transparent Clear Film S04/ T I P ML01 Outside Greenhouse 601A-FR 603B 601A 604-R 604A-R Opal White Film...
  • Page 26 FRONT FRAME ASSEMBLY CONTINUED ALWAYS ASSEMBLE FRONT HORIZONTAL 2.11 Move roof and lower front section together and align the W02’s into the 601A’s, and align the S04/ML01’s on the W02-T’s into the 604’s. Insure a Y3-1 snug t between the W02-T’s, 601B’s and 601A’s and 601B 601B then tighten the S05 screws as shown in...
  • Page 27 S04/ML01 L08A-X L08A-X 601A 601A S04/ML01 Set front aside in a shaded GRANDIO T I P area, do not lay on grass, prolonged sunlight through the polycarbon- Inside View 606-WS 606-WS ate panels will burn if placed directly on top...

  • Page 28: Back Assembly

    All parts for back assembly will be found in box GRA-ELE-64A and GRA-ELE-64P or GRA-ELE-68A and GRA-ELE-68P. We recommend that you assemble the back wall on a tarp. 601B 601B W04 WITH S04/ML01 GRANDIO Transparent Clear Film T I P Outside Greenhouse 602D 602D...
  • Page 29 BACK CONTINUED ALWAYS ASSEMBLE BACK HORIZONTAL Prethread all S05 Screws into the W08 and W02’s, only turn a few times, see Install W08 into (2) 601B’s then tighten S05 screws when extrusions are completely tight. See Fat End on the W02’s will always face downward. Install (2) W02’s into (2) 601B’s then tighten S05 screws as shown in diagram Note: the fat end of the W02’s will always be on the bottom side.
  • Page 30 BACK FRAME ASSEMBLY CONTINUED ALWAYS ASSEMBLE FRONT HORIZONTAL Use S03/ML01 combos to attach the (2) 601A’s to the L08A. See View diagrams and attach the (2) 602D’s to the L08A using the S03/ML01. See diagram TIP: If necessary you may use a screwdriver to wedge behind the bolt head.
  • Page 31 BACK FRAME ASSEMBLY CONTINUED ALWAYS ASSEMBLE FRONT HORIZONTAL Attach the (3) 606-WS’s to the L08A as shown in Insert the Y12 polycarbonate panels into the grooves of 601A and 602D’s. Make sure Y12 panels are inserted into 606-WS as shown in .
  • Page 32 BACK FRAME ASSEMBLY CONTINUED ALWAYS ASSEMBLE FRONT HORIZONTAL Locate the L08B and align the pre threaded S04-ML01 fasteners in each 603C’s to the L08B and to each of the 601A’s and 602D’s. When aligned tighten the middle rst and work your way outward. See diagrams 3.10 Insert the Y5 polycarbonate panel into place.
  • Page 33 BACK CONTINUED ALWAYS ASSEMBLE BACK HORIZONTAL 3.11 A. Attach the W04-1 to the 602D’s with W04-1 W04-1 S04/ML01 fasteners as shown in Inside View B. Attach (2) W02’s to (2) 601A’s with S05 as 601B 601B shown in 602D 602D Y4-1 Y4-2 601B...
  • Page 34 3.12 Attach the (2) L08A-X to L08B/602D’s and 602D’s. 3.13 To square front section loosen S04/ML01 attached to the bottoms of the (2) L08A-X’s, square the frame with carpenter square or use a measuring tape to make sure corner measurements are the same, tighten L08A-X’s to 601B 601B hold squareness, L08A-X should be attached a few inches...

  • Page 35: Middle Assembly

    Confirm that your Base Kit is anchored properly to your surface according to your anchor kit instructions. You will need a minimum of GRANDIO T I P (2) people to complete the middle assembly of your greenhouse. The more people the merrier at this stage of assembly.
  • Page 36 MIDDLE ASSEMBLY INSTRUCTIONS CONTINUED THIS PAGE SHOWS 6X12 EXTENSION KIT ASSEMBLY ONLY, SKIP AHEAD TO PAGE 35 FOR 6X4 OR 6X8 SIZES. Attach the 607 to 607-4X extension with the 607-XS and the (4) S08 screws provided. See . The S08 screws are to be installed on the inside as shown in diagram .
  • Page 37 MIDDLE ASSEMBLY INSTRUCTIONS CONTINUED THIS PAGE SHOWS 6X12 EXTENSION KIT ASSEMBLY ONLY, SKIP AHEAD TO PAGE 37 FOR 6X4 OR 6X8 SIZES. Attach the 609-XS’s to the 609 with (4) of the S09 screws provided see . The S09 screws are to be installed on the outside of the 609 and will tighten into the 609-X as shown in the diagrams.
  • Page 38 MIDDLE ASSEMBLY CONTINUED Attach back wall 601A’s with back base corners using S03/ML01 on both sides as shown in Attach bottom of L08C-X to rear section of base kit with S03/ML01, as shown in . Attach the L08C-X to the 601A as shown in , make sure the S03/ML01 combos are tight.
  • Page 39 MIDDLE ASSEMBLY CONTINUED With 2 people place the front section onto the base kit, aligning the corners with the base sides that have the edge. Have one person hold the front vertically while the other attaches the font section to the base with W05/S03/ML01 fasteners. See .
  • Page 40 MIDDLE ASSEMBLY CONTINUED With 2 people proceed to install 609’s in this order, note that 609 must be installed with groove side down. . Compare with 610 Gutter to make sure it will slide into 609 upon completion. 1. With one person holding the 609 level and in position have the other person attach the 609 to the 601B and 601A using S04/ML01 (nut and bolt).
  • Page 41 MIDDLE ASSEMBLY CONTINUED 4.10 With 2 people, attach the ridge to front and back by sliding into place as shown in , using S04/ML01 fasteners attach the 607 to the 601B’s. for how the nal orientation should be. 601B Inside View 601B 601B 601B...
  • Page 42 MIDDLE ASSEMBLY CONTINUED 4.11 Before you attach the 602A’s to the sides Inside View Profile View of the greenhouse you will need to remove the L08C-X 602B ML01 nuts attached to the S03, L08C-X. See S03/ML01 diagram Groove Inside View 1.
  • Page 43 MIDDLE ASSEMBLY CONTINUED 4.12 Attach (1) 602B to the middle of each side of the greenhouse as shown in the diagram. See Note the exact placement where the 602B aligns to the 609 and 607. 602B 602B S04/ML01 S04/ML01 602A 602B Inside View Inside View...
  • Page 44 MIDDLE ASSEMBLY CONTINUED 4.13 Attach the front section 619 to the base using (3) S04/ML01 fasteners as shown in , then attach the 619-BAR threshold support to the inside of the 619 with (3) S19 self tapping screws included in the package, see 619-BAR will attach to the 601A interior edge of the 619 with...
  • Page 45 For a 6x8 attach the additonal 602B’s as shown after all roof 602B vents are positioned. PC sheet Note Correct Orientation Inside View of Roof Vent Outside View Screwdriver For 6x8 size Elements GRANDIO T I P place roof windows in desired location before attaching all 602B’s for easiest installation.
  • Page 46 Y7’s will align when greenhouse is level or plumb. PC sheet 606-WS BASE Make sure the UV coated GRANDIO T I P side of the panel faces outward as indicated on the panels. Avoid placing the polycarbonate panels in the sun...
  • Page 47 MIDDLE ASSEMBLY CONTINUED 4.19 To ensure there is no gap in roof vent Inside view of 603B position 603C as shown in . Connect 603C 603C to middle of 602B’s using W04 brackets and S04/ML01 combos as shown. 602B 603B 4.20 Attach HQC01 to 616 with the Z04 screws see...
  • Page 48 MIDDLE ASSEMBLY CONTINUED 4.21 Insert polycarbonate sheets Y8’s and Y9’s into the lower roof of your greenhouse. Panels may slide out before gutters are in place. You may want to place a piece of tape on the panel to prevent sliding as shown in the diagram once the panels are in place.
  • Page 49 MIDDLE ASSEMBLY INSTRUCTIONS CONTINUED THIS PAGE IS FOR EXTENSION KIT INSTALLATION ONLY, SKIP TO NEXT PAGE FOR 6X4 AND 6X8. 4.23 Push gutters together so they meet in the middle, apply a small amount of the silicone caulk to the seam where the 610 gutters meet, then attach the DP02 on the inside of the gutter and the DP02B will slide under the gutter and will rest above the 602A.
  • Page 50 MIDDLE ASSEMBLY CONTINUED 4.24 For any size greenhouse if you have chosen to place a roof vent nearest the front or back you will need to locate the ENDCAP PLUG, you will slide into the 607 track just before placing the J601 caps into place in next steps. See 4.25 Attach caps to the ridge and gutters on both front and back as shown below.
  • Page 51 DOOR ASSEMBLY DIAGRAM This image shows the inside view of Right Door Assembly. All parts for door assembly will be found in box GRA-ELE-8A and GRA-ELE-8P or GRA-ELE-4A and GRA-ELE-4P. Use the #2 head Phillips Screw Driver for installation. 622-R Side View 623A 622-R...

  • Page 52: Door Assembly

    Side View 623B 623B 623B Inside View Bottom GRANDIO Transparent Clear Film View T I P Outside Greenhouse J08A J08A Opal White Film Polycarbonate...
  • Page 53 DOOR ASSEMBLY Insert J08A into the bottom of the 622-R and 622-L, note the bottom has a groove see Attach the 622-R to the 623B, 623A and 620 using the Z01 screws as shown in Follow the same instructions for the other door making sure that the 622-L and 622-R with the double ball catch match up so doors will latch closed and slide properly 623A 622-R...
  • Page 54 DOOR ASSEMBLY Slide the (2) S02 bolts down the track of the L21. See . Align with the holes on the 603A door header. With one person inside the greenhouse line up hanging door track L21 with door header 603D, move bolts on L21 to line up with bolt holes on door header 603A.
  • Page 55 Attach the door handles 622-HNDL to both doors using the 622-HNDL-NUT/BOLT provided to both doors as shown below in **We included some felt dots in your Grandio Welcome Kit, please apply to the inside bottom edge of the 623B as shown in these felt dots will make your doors t snug and slide smoothly.
  • Page 56 DOOR INSTALLATION 5.10 Attach J07’s to L21 with included screws on both ends of the L21. See 5.11 Check that the door locks are snug, you may adjust them with screwdriver if needed as they may be tight- ened or loosened. See...
  • Page 57 FINAL SUPPORT INSTALLATION 5.12 Attach the (2) L08C’s along the inner roof as shown in the image. The L08C’s will attach to the 601A’s and the 602B’s with S04/ML01 combos. 601B 601B L08C L08C 602B 602B 603C 602B Congratulations 602B You are now finished with assembly! 603C 602B...
  • Page 58 (GRA-ELE-6X4A) (GRA-ELE-6X8A) GRANDIO ELEMENT ALUMINUM PACKING LIST GRAPHIC PART NAME SIZE/LOCATION 6X4 QTY 6X8 QTY GRAPHIC PART NAME SIZE/LOCATION 6X4 QTY 6X8 QTY 1206 mm / 47 1436 mm / 56 1/2” 9/16” 607-4 601A ALL CORNERS 2394mm / 94 607-8 1/4“...
  • Page 59 (GRA-ELE-64A) (GRA-ELE-68A) GRANDIO ELEMENT ALUMINUM PACKING LIST GRAPHIC PART NAME SIZE/LOCATION 6X4 QTY 6X4 QTY GRAPHIC PART NAME SIZE/LOCATION 6x4 QTY 6x8 QTY L08A-X J601 END CAPS 1180 mm / 46 7/16” FRONT & BACK WALL X SUPPORT L08C-X 1480 mm / 58...
  • Page 60 (GRA-ELE-64A) (GRA-ELE-68A) GRANDIO ELEMENT ALUMINUM PACKING LIST GRAPHIC PART NAME SIZE/LOCATION QTY - 64A & 68A 622-HNDL DOOR HANDLES 622-COMBOS 4 FASTENER SETS 4 SETS 330 mm / 13” 1500 mm / 59 1/16“ L21 END CAP & (2) SCREWS...
  • Page 61 (GRA-ELE-64P) (GRA-ELE-68P) ELEMENT PANEL BOX PACKING LIST GRAPHIC NAME SIZE/LOCATION WIDTH HEIGHT 1 HEIGHT 2 6x4 QTY 6x8 QTY 488 mm / 19 1200 mm / 47 FRONT WALL PANEL 3/16” 1/4” Y2-1 FRONT PANEL 488 mm / 19 596 mm / 23 231 mm / 9 3/16”...
  • Page 62 (GRA-ELE-4XA) GRANDIO ELEMENT 4’ EXTENSION ALUMINUM PACKING LIST GRAPHIC PART NAME SIZE/LOCATION QUANTITY GRAPHIC PART NAME SIZE/LOCATION QUANTITY 553mm / 21 ” 1437 mm / 56 606-WS 602A 1/2” WINDOW SEAL SIDE WALL 609-4X-R 602B 1082 mm / 42 1187 mm / 46 5/8”...
  • Page 63 (GRA-ELE-4XA) GRANDIO ELEMENT 4’ EXTENSION ALUMINUM PACKING LIST GRAPHIC PART NAME SIZE/LOCATION QUANTITY M6*14 S04/ML01 ROOF VENT M3.5*16 SCREWS FOR ROOF VENTS ROOF VENT ARM HQCO1 ROOF VENT LATCH HQC02 HQC01 HARDWARE 2 EACH Z04, S04/ML01 M6*10 S03/ML01 FLAT MOUNT BRACKETS 602A-SPACER 100 mm / 4”...
  • Page 64 (GRA-ELE-4XP) GRANDIO ELEMENT 4’ EXTENSION PANEL PACKING LIST GRAPHIC PART # SIZE/LOCATION WIDTH HEIGHT 1 HEIGHT 2 SIDE PANEL 578 mm / 22 1450 mm / 57 3/4” 1/16” ROOF PANEL 578 mm / 22 1109 mm / 53 3/4”...
  • Page 65 (GRA-ELE-4XP) GRANDIO ELEMENT 4’ EXTENSION PANEL PACKING LIST GRAPHIC PART # SIZE/LOCATION WIDTH HEIGHT 1 HEIGHT 2 SIDE PANEL 578 mm / 22 1450 mm / 57 3/4” 1/16” ROOF PANEL 578 mm / 22 1109 mm / 53 3/4”...

  • Page 66: Warranty

    Grandio Greenhouse Limited Lifetime Warranty 1. Grandio Greenhouses are warranted to the original purchaser to be free from defects in material or workmanship for ten years from the date of original retail purchase on all plastic panels. Additionally the aluminium frame is warrantied for life. The word “defects” is de ned as imperfections that impair the use of the product.
  • Page 67 NOTES NOTES...
  • Page 68 GRANDIO ® G R E E N H O U S E S 2015 Grandio Element 6x4, 6x8, 4x Models With Dirt Mount Base Kits GREENHOUSE USER MANUAL KEEP IN A SAFE PLACE FOR REFERENCE CONTACT US IF YOU NEED HELP HAVE MISSING OR DAMAGED PARTS GRANDIOGREENHOUSES.COM...

This manual is also suitable for:

Grandio element 6x4 with base kit

Table of Contents