Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Grandio Manuals
  4. Greenhouse Kit
  5. GRA-812BR-GR
  6. User manual

Grandio GRA-812BR-GR User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
GRANDIO
G R E E N H O U S E S
Model GRA-812BR-GR
8x12 GRANDIO ELITE
GREENHOUSE USER MANUAL
© 2013 Grandio Greenhouses, Backyard Living Source Inc. All rights reserved

Advertisement

loading
Need help?

Need help?

Do you have a question about the GRA-812BR-GR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Grandio GRA-812BR-GR

Summary of Contents for Grandio GRA-812BR-GR

  • Page 1 GRANDIO G R E E N H O U S E S Model GRA-812BR-GR 8x12 GRANDIO ELITE GREENHOUSE USER MANUAL © 2013 Grandio Greenhouses, Backyard Living Source Inc. All rights reserved...
  • Page 2 City or Municipality ordinances and HOA’s, as you may need reference and if you need our help. a permit or documentation before you build. CONTACT OUR CUSTOMER SERVICE Contact your insurance company to make sure your Grandio Greenhouse will DEPARTMENT at: be covered on your policy. 1-866-928-3150 Call your local utilities companies before digging.

  • Page 3: Important Safety Instructions

    Before beginning assembly, read the instruc- tions and identify all parts using the hardware identifier and parts list on pages 35-40. Complete assembly and proper usage are essential to reduce the risk of accident or injury when using your Grandio Greenhouse. CAUTION:...
  • Page 4 8X12 GRANDIO ELITE BARN STYLE and leveled for installation of your greenhouse prior GREENHOUSE DIMENSIONS to starting the assembly of your Grandio Greenhouse. Decide at this time the nal orientation of your Greenhouse. We recommend that you place your greenhouse in a location where it will receive the most direct sunlight and will be best protected from wind and storm conditions.

  • Page 5: Left Side

    BACK L08A This diagram shows the 8x8 Grandio, for the L08B-X L08B-X 8x12 Grandio you will repeat the middle section of the sides as shown below on LEFT SIDE and RIGHT SIDE. 601A-B 601A-B L08B 603C 603C 603C 603C 601A-B...
  • Page 6 GRANDIO © G R E E N H O U S E S ASSEMBLY INSTRUCTION STEPS STEP ONE: BASE ASSEMBLY STEP TWO: FRONT ASSEMBLY STEP THREE: BACK ASSEMBLY STEP FOUR: MIDDLE ASSEMBLY STEP FIVE: DOOR ASSEMBLY...
  • Page 7 (Not Included). Base Base Use a Hacksaw or Tinsnip to cut down the length of W06 Make sure base is squared GRANDIO T I P and W07, then install cut side and level before setting down to level surface. S03 BOLT S03 BOLT anchor into concrete.
  • Page 8 L08D 603C 603C We recommend watching GRANDIO T I P our how to assembly videos with tricks and tips for easier assembly and installation of your Grandio Greenhouse at: 601A-FR 601A-FL 604-R 604-L www.grandiogreenhouses.com Lay at on ground to GRANDIO...

  • Page 9: Front Frame Assembly

    WG02 will always be on the bottom side. 603E WG02 Inside View 601B BOLT INSTALLATION TIP: GRANDIO T I P Locate all nuts and bolts, pre thread and place in the groove of the extrusion to make installation easier. Move WG01 up or down for exact placement.
  • Page 10 601B ML01 603E 603D 603D W04-1 BOLT INSTALLATION TIP: GRANDIO T I P Locate all nuts and bolts, pre thread and place in the groove of the extrusion to make installation easier. Move up or down for exact placement. GRANDIO...
  • Page 11 If necessary you may use a screwdriver to wedge behind the bolt head. This prevents bolt from falling into the track. 601A-FR 604-L ML01 Make sure the small screw GRANDIO ML01 T I P hole on the 601A face to INSIDE DOOR FRAME the sides of greenhouse for future installa-...
  • Page 12 Y2 and Y1 panels and tighten fasteners. See 2.11 Insert the Y2-2 and Y2-1 polycarbonate panels as shown in Y2-2 Y2-1 603C L08D GRANDIO Transparent Film S04/ L08D L08D T I P ML01 Outside Greenhouse 601A...
  • Page 13 FRONT FRAME ASSEMBLY 2.12 601B Move roof and front section together and align the WG02’s into the 601A’s, and the W04-2’s into the 604’s. Insure a snug t between the WG02’s, 601B’s and 601A’s and then tighten the S05 screw as shown in 601A Tighten the W04-2’s with the S04 /ML01 nut Y3-1...
  • Page 14 BACK ASSEMBLY INSTRUCTIONS This image shows the inside view of the back wall assembly. Inside View 601B 601B 601B WG02 WG02 WG01 GRANDIO Transparent Film T I P Outside Greenhouse 601B 601B Y5-2 Y5-1 Opal White Film Polycarbonate Y4-2 Y4-1...
  • Page 15 S05 screws, see 603E WG02 Inside View BOLT INSTALLATION TIP: GRANDIO 601B T I P Locate all nuts and bolts, pre thread and place in the groove of the extrusion to make installation easier. Move WG01 up or down for exact placement.
  • Page 16 BACK CONTINUED Attach (2) 601A-B’s to L08A using S04/ML01 fastener as shown in diagram Attach (2) 602D’s to L08A using S04/ML01 fasteners as shown in diagram Attach 603C to L08A using S04/ML01 fastener as shown in diagram Attach the (4) 606’s to the L08A as shown in Insert the Y4 polycarbonate panels into the 601A-B 602D...
  • Page 17 BACK CONTINUED Attach (4) 603C’s atop each Y-1 panel, then align the pre threaded S04-ML01 fasteners in each 603C to the L08B and to each 601A-B, 602D and the 602C. When aligned tighten the middle rst and work your way outward. See diagrams Y5-2 Y5-1 Y4-2...
  • Page 18 601A-B 601A-B 601B WG02 601A BOLT INSTALLATION TIP: GRANDIO T I P Locate all nuts and bolts, pre thread and place in the groove of the extrusion to make installation easier. Move Inside View up or down for exact placement.
  • Page 19 602D 602D S04/ML01 603B L08B-X L08A Inside View L08B-X L08B-X ML01 601A-B 601A-B Square by loosening bolts GRANDIO T I P attached to the tops of the L08B-X, use measuring tape to make sure corners to corner measures the same.
  • Page 20 Side Base Outside Inside You will need a minimum of Base GRANDIO T I P (2) people to complete the middle assembly of your greenhouse. The more people the merrier at this stage of Inside View assembly.
  • Page 21 MIDDLE ASSEMBLY CONTINUED While the front section is being supported vertically by the other person(s) slide in and attach the L08C’s to the front section as shown in . Using tape temporarily attach the loose end of the L08C’s to the base kit as shown in Front Side L08C...
  • Page 22 MIDDLE ASSEMBLY CONTINUED Attach L08C-X to 601A with S04/ML01 on both sides as shown in Attach bottom of L08C-X to L08C, W05, and base as shown in . Repeat steps for other side. The L08C-X braces will hold the front up vertically without assistance.
  • Page 23 MIDDLE ASSEMBLY CONTINUED With 2 people, attach the ridge to front and back by sliding into place as Side Angle View shown in , using S04/ML01 fasteners attach the 607 to the 601B’s as shown in 601B 601B Outside View Inside View 601B 601B...
  • Page 24 5. Attach the mid roof 609’s with S04/ML01 nut View L08C-X and bolt on both sides see Groove Remove only one L08C-X GRANDIO T I P at a time. If all L08C-X’s are removed, the structure will collapse and cause unwarrantable damage.
  • Page 25 Before you attach the 602A’s to the sides of the greenhouse you will need to loosen the ML01 (nut) attached to the L08C-X and L08C located at the base. Once the bottom of 601B L08C-X’s are loosened on one side attach the 602A’s to the sides of the greenhouse in this order.
  • Page 26 4.12 602B’s, one end of the extrusion is Locate all trimmed at an angle this end will always go downward to create a ush t with the 630 or the 610 when complete see . Attach (4) 602B’s to 609’s and 607’s as shown in diagram on both sides of the upper roof section.
  • Page 27 4.16 Attach all remaining 602B’s after roof vents are positioned. * Make sure the beveled edge goes downward. PC sheet Outside View Outside View Screwdriver Place roof windows in GRANDIO T I P desired location before attaching all 602B’s.
  • Page 28 4.17 To ensure there is no gap in roof vent position 603C as shown in . Connect Inside view of 603C 603C to middle of 602B’s using W04 603C bracket as shown in 603C 602B 4.18 Attach HQC01 to 616 with the screws , close roof vent and attach the handle onto HQC02 middle pin (the rst 603C...
  • Page 29 4.19 Insert polycarbonate sheets Y8’s and Y9’s into the lower roof of your greenhouse. Panels may slide out before gutters are in place. You may want to place a piece of tape on the panel to prevent sliding as shown below once the panels are in place. 4.20 Slide 610 into 609’s groove as shown in diagram .
  • Page 30 4.21 Attach JG01, JG02, and JG03 end caps to the ridge and gutters on both front and back as shown below. Squeeze a small amount of rubberized silicone or construction adhesive into the ends of ridge (607) to secure pressure t end caps (601).
  • Page 31 DOOR ASSEMBLY DIAGRAM 622-R Side View 623A 622-L Side View 623A Double Ball Catch 623B 623B J08A 623B Bottom View Bottom View J08A J08A J08A...
  • Page 32 , make sure to match doors up to each by laying out parts for other door now so window panels face the right direction to the sun. 623A 623A 623A Side View 623B 623B 623B Bottom 623B GRANDIO Transparent Film View T I P Outside Greenhouse J08A J08A Opal White Film Polycarbonate Inside Greenhouse Panel...
  • Page 33 Insert J08A into the bottom of the 622, note the bottom has a groove see Insert J04 into the 623B as shown in , then use the Z01 screw to attach to the bottom of the 623B, then attach 622 to the 623A and 620 using the Z01 screws as shown in Follow the same instructions for the other door making sure that the 622-L and 622-R with the double ball catch match up so doors will latch closed and slide properly.

  • Page 34: Door Assembly

    DOOR ASSEMBLY With one person inside greenhouse line up hanging door track with door header, move bolts on L21 to line up with bolt holes on door header 603D. From the inside attach the S02 nut and bolt set and tighten while holding rmly as high as possible in position from the outside. 603D...

  • Page 35: Door Installation

    DOOR INSTALLATION Separately slide the top of the doors in the left and right side of L21, see diagram , while making sure they are rolling in the track at the base of 619 until they latch in the middle. If the J04 rollers on the bottom track are catching or dragging you may need to adjust the height by turning the screw shown in Attach the door handles 622-HNDL to both doors using the 622-HNDL-NUT/BOLT provided to both doors as shown below in...
  • Page 36 DOOR INSTALLATION 5.10 Attach L28 to L21 and 601A as shown below in diagram . Attach (2) J07 to 603A the ends of L21 see 5.11 Remove all plastic lm from polycarbon- ate window panels immediately at this step. S04/ML01 Top View 601A...
  • Page 37 INTERIOR ROOF SUPPORT ASSEMBLY 5.12 Attach the L08E-X to the upper roof ” ” 3/ 4 3/ 4 section as shown with ML01/S04 fasteners already in place where the 607 meets the 601B, and the 609 and the 602B meet see , repeat BZ-1 this on the front section.
  • Page 38 GREENHOUSE GRA-88 94 5/16” ROOF PICTURE PARTS NO. DESCRIPTION MODELS 142 5/16“ ROOF GRA-812 601A-B ALL MODELS 49 1/8” CORNER 94 5/16” ROOF 601A-FL GRA-88 49 1/8” CORNER ALL MODELS 142 5/16“ ROOFv GRA-812 601-FR 49 1/8” CORNER ALL MODELS 94 5/16”...
  • Page 39 GRA-88 L08B-X ALL MODELS 51 1/8” BACK 22 3/4” ROOF WINDOW GRA-812 61” SIDES 22 3/4“ ALL MODELS L08C-X ROOF WINDOW ALL MODELS 37 3/4” ROOF L08D-X GRA-88 22 3/4” ROOF WINDOW GRA-812 ALL MODELS 37 5/8“ ROOF 22 3/4“ L08E-X ROOF WINDOW GRA-88...
  • Page 40 GRA-88 ROOF ALL MODELS 6X20 MM HQC01 GRA-812 ROOF GRA-88 M6X10 S03/M01 GRA-88 ROOF GRA-812 HQC02 M6X10 GRA-812 ROOF M6X14 GRA-88 ALL MODELS 10 MM NUT DRIVER ML01/S04 M6X14 GRA-812 WINDOW SEAL GRA-88 ALL MODELS PHILLIPS SCREWS WINDOW SEAL GRA-812 ALL MODELS JG01 ROOF CAP...
  • Page 41 ALL MODELS DOOR PANEL ALL MODELS FRONT & BACK PANEL ALL MODELS FRONT PANEL SIDE PANEL Y2-1 GRA-88 Y2-2 ALL MODELS FRONT PANEL SIDE PANEL GRA-812 Y3-1 ALL MODELS FRONT PANEL GRA-88 ROOF PANEL FRONT PANEL Y3-2 ALL MODELS ROOF PANEL GRA-812 Y4-1 ALL MODELS...
  • Page 42 GRANDIO G R E E N H O U S E S Model GRA-88BR-GR & Model GRA-812BR-GR GREENHOUSE USER MANUAL KEEP IN A SAFE PLACE FOR REFERENCE CONTACT US IF YOU NEED HELP HAVE MISSING OR DAMAGED PARTS GRANDIOGREENHOUSES.COM BACKYARD LIVING SOURCE, INC.