The picture position is incorrect:
•
Picture signals from some devices may
not fi t the screen correctly. Check the
signal output of the device.
Sound issues
There is a picture but no sound from the TV:
Note
•
If no audio signal is detected, the TV automatically
switches the audio output off — this does not
indicate malfunction.
•
Check that all cables are properly
connected.
•
Check that the volume is not set to 0.
•
Check that the sound is not muted.
There is a picture but the sound quality is
poor:
•
Check that the sound settings are
correctly set.
There is a picture but sound comes from one
speaker only:
•
Verify that sound balance is set to the
centre.
HDMI connection issues
There are problems with HDMI devices:
•
Note that HDCP support can delay the
time taken for a TV to display content
from a HDMI device.
•
If the TV does not recognise the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
•
If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
•
If a HDMI-to-DVI adaptor or HDMI to
DVI cable is used, check that an additional
audio cable is connected to AUDIO L/R
or AUDIO IN (mini-jack only).
Computer connection issues
The computer display on the TV is not stable:
•
Check that a supported resolution and
refresh rate is selected on the computer.
•
Set the TV picture format to unscaled.
Contact us
If you cannot resolve your problem, refer to
the FAQs for this TV at www.philips.com/
support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in this User Manual.
Warning
•
Do not attempt to repair the TV yourself. This may
cause severe injury, irreparable damage to your TV
or void your warranty.
Note
•
Make a note of your TV model and serial number
before you contact Philips. These numbers are
printed on the back of the TV and on the packaging.
EN
27