Sound Issues; Hdmi Connection Issues; Usb Connection Issues - Philips FLAVORS 22PFL6403D/12 User Manual

The TV did not save my settings:
•
Verify that the TV is set to
which offers you complete fl exibility to
change settings.
The picture does not fi t the screen, it is too
big or too small:
• Try using a different picture format.
• Assign your device to connectors.
The picture position on-screen is not correct:
•
Picture signals from some devices do not
fi t the screen correctly. Check the signal
output of the device.
When applying a menu theme, a message
appears informing you that the TV memory
is full
•
Not more than six menu themes can
be stored on the TV at one time. You
are prompted to delete a theme if you
attempt to store more than six themes.
When applying a menu theme, a message
appears informing you that the theme cannot
be applied:
•
There may have been an error when the
fi le was downloaded. Download the fi le
again and reapply the theme.

Sound issues

There is a picture but sound quality is poor:
Note
•
If no audio signal is detected, the TV automatically
switches off audio output and does not indicate
malfunction.
Verify that:
• All cables are properly connected.
•
The volume is not set to 0.
•
The sound is not muted.
There is picture but sound quality is poor:
In [Sound] settings, verify that:
[Position] is correct for where
•
your TV is positioned. The [Table-
top] setting should be used for
TVs mounted on stands. The [Wall
36 EN
[Home] mode,
mount] setting should be used for TVs
mounted on walls.
[Equalizer] settings are suitable for
•
your environment.
[Stereo] is enabled.
•

HDMI connection issues

You encounter problems with HDMI devices
•
HDCP support can delay the time taken
for a TV to display content from a device.
• If the TV does not recognise the device
and no picture is displayed, try switching
from one device to another and back again
to restart.
• If you experience intermittent sound
disruptions, check the user manual of the
HDMI device to verify that output settings
are correct. Alternatively, try connecting
the audio signal from the HDMI device to
the TV via AUDIO IN L/R .
• If a HDMI-to-DVI adaptor or HDMI to DVI
cable is used, check that an additional audio
cable is connected to AUDIO IN L/R .

USB connection issues

The USB device content is not displayed:
•
Set your device to 'Mass Storage Class'
compliant, as described in your device
documentation.
•
Your USB storage device may not be
compatible with the TV.
• Not all audio and picture fi les are
supported.
Audio and picture fi les do not play or display
smoothly
• The transfer performance of the USB
storage device may limit the transfer rate.