Manually Install Channels - Philips 42PFL3604/12 User Manual

8
Press OK to confi rm your choice.
9
When done, press

Manually install channels

This section describes how to search and store
analogue TV channels manually.
1
MENU .
Press
2
Select [Installation] > [Channel install.]
> [Analogue: Manual]
[Analogue: Manual] menu appears.
The
È
Menu language
Picture
Channel install.
Preferences
Sound
Decoder
Factory settings
Features
Current software
Installation
3
Press to select the item you want to
adjust.
[System]
•
[Search]
•
• [Fine-tune]
• [Store cur. chan.]
• [Store new channel]
Step 1 Select your system
Note
•
Skip this step if your system settings are correct.
1
Press MENU .
2
Select [Installation] > [Channel install.]
> [Analogue: Manual]
The [Analogue: Manual] menu appears.
È
3
Press to select and enter
[System] .
MENU to exit.
Channel assistant
Analogue: Manual
4
Press to select your country or
region.
5
Press OK to confi rm.
6
Press MENU to exit.
Step 2 Search and store new TV
channels
1
MENU .
Press
2
Select [Installation] > [Channel install.]
> [Analogue: Manual] .
[Analogue: Manual] menu appears.
The
È
3
Press to select and enter [Search] .
4
Press or use Numeric buttons to
manually enter the three digit frequency.
5
Press OK to begin search.
6
Press when the new channel is found.
7
to select [Store new channel]
Press
to store the new channel under a new
channel number.
8
to enter [Store new channel] .
Press
9
Press to select [Yes] and press OK to
store the new channel.
10
Press MENU to exit.
Fine tune analogue channels
1
Press MENU .
2
Select [Installation] > [Channel install.]
> [Analogue: Manual] .
[Analogue: Manual] menu appears.
The
È
3
to select and enter [Fine-
Press
tune] .
4
Press to adjust frequency.
5
Press OK when done.
6
Press to select [Store cur. chan.] to
store channel number.
7
Press to enter [Store cur. chan.] .
8
Press to select [Yes] and press OK to
store current channel.
9
Press MENU to exit.
EN 19