Use Child Control And Rating Locks - Philips 42PFL3604/12 User Manual

1
Press MENU .
2
Select [Features] > [Sleeptimer] .
The [Sleeptimer] menu appears.
È
3
Press to set the sleep time.
The sleeptimer can be up to 180
È
minutes in steps of fi ve minutes. If
set to zero minutes, the sleeptimer is
switched off.
4
Press OK to activate the sleeptimer.
The TV switches to standby after the
È
pre-defi ned period of time.
Automatically switch the TV on (on
timer)
You can switch the TV to a specifi ed channel
at a specifi ed time, from standby.
1
Press MENU .
2
Select [Features] > [On timer] .
3
to enter the [On timer] menu.
Press
4
to select [Activate] and set
Press
a day of the week or frequency.
5
Press OK to confi rm.
6
Press to select [Time] and set the
starting time.
7
Press [Done] to confi rm.
8
Press to select [Programme no.]
and set the channel.
9
Press OK to confi rm.
10
MENU to exit.
Press
Tip
•
[On timer] > [Activate] > [Off] to disable
Select
[On timer] .
•
[On timer] is [Off] , only [Activate] can be
When
selected.
•
Set the TV clock before activating
(see 'Set the TV clock' on page 16 ) .
[On timer] feature
Use child control and rating
locks
You can prevent your children from watching
certain programmes or certain channels by
locking the TV controls and by using ratings.
Set or change the TV lock code
1
MENU .
Press
2
to select [Features] > [Set
Press
code] .
3
Press to enter the code setup.
4
Enter your code using the Numeric
buttons .
5
Re-enter the same code in the new
dialogue box for confi rmation.
If the code is set successfully, the
È
dialogue box will disappear. However, if
the code cannot be set, a new dialogue
box will prompt you to re-enter the
code.
6
If you want to change the code, select
[Features] > [Change code] .
7
Enter your current code using the
Numeric buttons .
If the code is validated, a new dialogue
È
box will prompt you to enter your
new code.
8
Enter the new code using the Numeric
buttons .
A message appears prompting you
È
to enter the new code again for
confi rmation.
Tip
•
If you forget your code, enter '8888' to override any
existing codes.
EN 15