Use Of The Digital Timer - Whirlpool ACM 6601 G Manual

USE OF YOUR PRODUCT

Use of the digital timer

In order to cook in the oven, the oven function and temperature setting must be adjusted. For models
with timer, the time of day also needs to be adjusted. Otherwise, the oven will not operate. As the
adjusted time will be reset in the event of a power failure, or when the appliance is disconnected from
the power supply, time adjustment will have to be performed again.
A
-
MODE
2- Without delay, press the + or - buttons to adjust the time displayed.
This operation will need to be performed after each time that the power supply has been switched off
and back on again.
The cookpot symbol
Audible Minute Minder (count-down timer)
This feature does not operate the oven (see Automatic program setting).
This option will cause an audible warning beep to sound after a set period of time. The minute minder
can be set to any period from 1 minute to a max of 23 hours and 59 minutes, in 1 minute increments.
To set the time period;
1- Press the MODE button - the figures and a bell symbol will flash.
2- Without delay, press the + and - buttons to select the required period of time.
3- When the buttons are not pressed for a few seconds, the display will stop flashing, indicating that
the minute minder is set.
4- When the timer has counted down to zero a bleeping sound will be heard. To silence the timer,
press one of the timer buttons.
Adjusting the time day :
When the appliance has first been switched on, the figures
displayed will flash and the oven not operate until the time of day
is set.
To set the time of day;
+
1- Press the + and - buttons simultaneosly. This may need to be
repeated 2 or 3 times until a symbol and a flashing dot in the
centre of the screen appear, indicating that the timer is in
'adjustment mode'.
is permanently displayed when the timer is set for manual use.
7